In the past I have used the chart module for a little flow chart in a presentation. I wanted to make again flow charts. But I did not get it working. I just compiled my old version again, but this does not work also. The chart is drawn, but the boxes and lines are invisible. That is not very usefull. What could be the problem? When executing 'texexec --check' I get: MTXrun | kpse fallback with progname 'context' initialized in 0.03 seconds TeXExec | current distribution: web2c TeXExec | context source date: 2009.08.19 17:10 TeXExec | format path: . /home/cecil/texmf//home/cecil/texmf/web2c /etc/texmf//home/cecil/texmf/web2c /var/lib/texmf//home/cecil/texmf/web2c /usr/lib/texmf//home/cecil/texmf/web2c /usr/local/share/texmf//home/cecil/texmf/web2c /usr/share/texmf//home/cecil/texmf/web2c /etc/texmf/web2c /var/lib/texmf/web2c /home/cecil/texmf/web2c/unsetengine /etc/texmf/web2c/unsetengine /var/lib/texmf/web2c/unsetengine /usr/lib/texmf/web2c/unsetengine /usr/local/share/texmf/web2c/unsetengine /usr/share/texmf/web2c/unsetengine /home/cecil/texmf/web2c /etc/texmf/web2c /var/lib/texmf/web2c /usr/lib/texmf/web2c /usr/local/share/texmf/web2c /usr/share/texmf/web2c TeXExec | start of analysis TeXExec | end of analysis TeXExec | TeXExec | TeXExec | version 6.2.1 - 1997-2009 - PRAGMA ADE/POD TeXExec | TeXUtil | version 9.1.0 - 1997-2005 - PRAGMA ADE/POD TeXExec | CtxTools | version 1.3.5 - 2004/2008 - PRAGMA ADE As a side note: is it possible to generate a JPG file instead of a PDF file? -- Cecil Westerhof M CLDWesterhof@gmail.com O< ascii ribbon campaign - stop html mail - www.asciiribbon.org Please do not send me Microsoft Office/Apple iWork documents. Send OpenDocument instead! http://fsf.org/campaigns/opendocument/
On 3-11-2010 2:52, Cecil Westerhof wrote:
In the past I have used the chart module for a little flow chart in a presentation. I wanted to make again flow charts. But I did not get it working. I just compiled my old version again, but this does not work also. The chart is drawn, but the boxes and lines are invisible. That is not very usefull. What could be the problem?
When executing 'texexec --check' I get: MTXrun | kpse fallback with progname 'context' initialized in 0.03 seconds TeXExec | current distribution: web2c TeXExec | context source date: 2009.08.19 17:10 TeXExec | format path: . /home/cecil/texmf//home/cecil/texmf/web2c /etc/texmf//home/cecil/texmf/web2c /var/lib/texmf//home/cecil/texmf/web2c /usr/lib/texmf//home/cecil/texmf/web2c /usr/local/share/texmf//home/cecil/texmf/web2c /usr/share/texmf//home/cecil/texmf/web2c /etc/texmf/web2c /var/lib/texmf/web2c /home/cecil/texmf/web2c/unsetengine /etc/texmf/web2c/unsetengine /var/lib/texmf/web2c/unsetengine /usr/lib/texmf/web2c/unsetengine /usr/local/share/texmf/web2c/unsetengine /usr/share/texmf/web2c/unsetengine /home/cecil/texmf/web2c /etc/texmf/web2c /var/lib/texmf/web2c /usr/lib/texmf/web2c /usr/local/share/texmf/web2c /usr/share/texmf/web2c TeXExec | start of analysis TeXExec | end of analysis TeXExec | TeXExec | TeXExec | version 6.2.1 - 1997-2009 - PRAGMA ADE/POD TeXExec | TeXUtil | version 9.1.0 - 1997-2005 - PRAGMA ADE/POD TeXExec | CtxTools | version 1.3.5 - 2004/2008 - PRAGMA ADE
As a side note: is it possible to generate a JPG file instead of a PDF file?
no clue as no test file ... is write 18 enabled on your system? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Op woensdag 3 nov 2010 19:41 CET schreef Hans Hagen:
In the past I have used the chart module for a little flow chart in a presentation. I wanted to make again flow charts. But I did not get it working. I just compiled my old version again, but this does not work also. The chart is drawn, but the boxes and lines are invisible. That is not very usefull. What could be the problem?
When executing 'texexec --check' I get: MTXrun | kpse fallback with progname 'context' initialized in 0.03 seconds TeXExec | current distribution: web2c TeXExec | context source date: 2009.08.19 17:10 TeXExec | format path: . /home/cecil/texmf//home/cecil/texmf/web2c /etc/texmf//home/cecil/texmf/web2c /var/lib/texmf//home/cecil/texmf/web2c /usr/lib/texmf//home/cecil/texmf/web2c /usr/local/share/texmf//home/cecil/texmf/web2c /usr/share/texmf//home/cecil/texmf/web2c /etc/texmf/web2c /var/lib/texmf/web2c /home/cecil/texmf/web2c/unsetengine /etc/texmf/web2c/unsetengine /var/lib/texmf/web2c/unsetengine /usr/lib/texmf/web2c/unsetengine /usr/local/share/texmf/web2c/unsetengine /usr/share/texmf/web2c/unsetengine /home/cecil/texmf/web2c /etc/texmf/web2c /var/lib/texmf/web2c /usr/lib/texmf/web2c /usr/local/share/texmf/web2c /usr/share/texmf/web2c TeXExec | start of analysis TeXExec | end of analysis TeXExec | TeXExec | TeXExec | version 6.2.1 - 1997-2009 - PRAGMA ADE/POD TeXExec | TeXUtil | version 9.1.0 - 1997-2005 - PRAGMA ADE/POD TeXExec | CtxTools | version 1.3.5 - 2004/2008 - PRAGMA ADE
As a side note: is it possible to generate a JPG file instead of a PDF file?
no clue as no test file ... is write 18 enabled on your system?
Below the stripped down version of the code. Write 18 was not enabled. I enabled it, but still I do not see the boxes and the lines. \usemodule[chart] %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%% % This is where the document starts. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \starttext \setupFLOWcharts [ dx=2\bodyfontsize, dy=2\bodyfontsize, height=2.1\lineheight, maxwidth=\textwidth, nx=3, ny=5, ] \setupFLOWshapes [ background=color, backgroundcolor=darkblue, ] \startFLOWchart[SPICE] \startFLOWcell \name{source} \location{2,1} \text{{\tfc S}ource} \connection[bt]{PICTURE} \stopFLOWcell \startFLOWcell \name{PICTURE} \location{2,2} \text{{\tfc P}icture} \connection[bt]{IMPLEMENTATION} \stopFLOWcell \startFLOWcell \name{IMPLEMENTATION} \location{2,3} \text{{\tfc I}mplementation} \connection[bt]{CONSEQUENCE} \stopFLOWcell \startFLOWcell \name{CONSEQUENCE} \location{2,4} \text{{\tfc C}onsequence} \connection[bt]{ENRICHEMENT} \stopFLOWcell \startFLOWcell \name{ENRICHEMENT} \location{2,5} \text{{\tfc E}nrichement} \connection[bt]{SOURCE} \connection[bt]{PICTURE} \connection[bt]{IMPLEMENTATION} \stopFLOWcell \stopFLOWchart \FLOWchart[SPICE] \stoptext %%% Local Variables: %%% mode: context %%% TeX-master: t %%% End: -- Cecil Westerhof
Op woensdag 3 nov 2010 19:41 CET schreef Hans Hagen:
In the past I have used the chart module for a little flow chart in a presentation. I wanted to make again flow charts. But I did not get it working. I just compiled my old version again, but this does not work also. The chart is drawn, but the boxes and lines are invisible. That is not very usefull. What could be the problem?
[CUT]
no clue as no test file ... is write 18 enabled on your system?
I took this code from the internet. So I suppose this should work. \usemodule[chart] \starttext \startFLOWchart[cells] \startFLOWcell \name {first} \location {1,1} \shape {singledocument} \text {not really a document} \stopFLOWcell \stopFLOWchart \FLOWchart[cells] \stoptext But it gives: http://www.decebal.nl/ConTeXt/flowchart.pdf The log file created is at: http://www.decebal.nl/ConTeXt/flowchart.log The only things I see that could mean something are: systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead pdfTeX warning: pdftex: no GlyphToUnicode entry has been inserted yet! But I do not know if that is a problem. The pfd is made with: texexec --automp flowchart Without the --automp I get a message about mpost. -- Cecil Westerhof M CLDWesterhof@gmail.com O< ascii ribbon campaign - stop html mail - www.asciiribbon.org Please do not send me Microsoft Office/Apple iWork documents. Send OpenDocument instead! http://fsf.org/campaigns/opendocument/
On 19-11-2010 8:43, Cecil Westerhof wrote:
The only things I see that could mean something are: systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead
this is harmless but you can copy the file cont-sys.rme to cont-sys.tex and tweak its content
pdfTeX warning: pdftex: no GlyphToUnicode entry has been inserted yet!
But I do not know if that is a problem.
The pfd is made with: texexec --automp flowchart
Without the --automp I get a message about mpost.
Is mpost run or not? Your code looks ok and generates an image here, so it looks like mpost is not run on your system. For the moment forget about --automp as it only makes sense as speed optimization. - double check if write18 is enabled in the used texmf.cnf file - make sure that there is a metafun format (texexec --make metafun) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
2010/11/19 Hans Hagen
On 19-11-2010 8:43, Cecil Westerhof wrote:
The only things I see that could mean something are:
systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead
this is harmless but you can copy the file cont-sys.rme to cont-sys.tex and tweak its content
I did not think so, but better safe as sorry. pdfTeX warning: pdftex: no GlyphToUnicode entry has been inserted yet!
But I do not know if that is a problem.
The pfd is made with: texexec --automp flowchart
Without the --automp I get a message about mpost.
Is mpost run or not? Your code looks ok and generates an image here, so it
looks like mpost is not run on your system.
I tried to make it after running 'texexec --make metafun'. It is still not run. I get: systems : begin file flowchart at line 3 (./flowchart-flw-1.tmp) (./flowchart-flw-1.tmp) (./flowchart-flw-1.tmp)sh: mpost: opdracht niet gevonden locate mpost gives: /home/cecil/ConTeXt/tex/texmf-linux/bin/mpost /home/cecil/ConTeXt/tex/texmf/metapost/base/mpost.mp /usr/lib/texmf/doc/man/man1/mpost.man1.pdf /usr/share/doc/packages/libSDL-devel/html/sdlsempost.html /usr/share/pstoedit/mpost.fmp Trying alias mpost=/home/cecil/ConTeXt/tex/texmf-linux/bin/mpost does not make a difference. For the moment forget about --automp as it only makes sense as speed
optimization.
I read somewhere to use it when having a problem with mpost. And I do not get a message when using it. But I forget about it. - double check if write18 is enabled in the used texmf.cnf file
When trying to make the pdf I get: This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/openSUSE) \write18 enabled. (/usr/lib/texmf/web2c/natural.tcx) entering extended mode (./flowchart.tex So it should be enabled.
- make sure that there is a metafun format (texexec --make metafun)
Gives: MTXrun | kpse fallback with progname 'context' initialized in 0.04 seconds TeXExec | using search method 'kpsewhich' TeXExec | updating file database mktexlsr: Updating /etc/texmf/ls-R... mktexlsr: Updating /var/lib/texmf/main/ls-R... mktexlsr: Updating /usr/share/texmf/../../../var/lib/texmf/dist/ls-R... mktexlsr: Updating /var/cache/texmf/fonts/ls-R... mktexlsr: Updating /var/lib/texmf/ls-R... mktexlsr: Done. TeXExec | using mp engine mpost TeXExec | using mps format path /etc/texmf/web2c TeXExec | generating mps format metafun TeXExec | TeXExec | mps engine path: /etc/texmf/web2c TeXExec | TeXExec | TeXExec | runtime: 0.675681 -- Cecil Westerhof
On Fri, 19 Nov 2010, Cecil Westerhof wrote:
2010/11/19 Hans Hagen
On 19-11-2010 8:43, Cecil Westerhof wrote:
The only things I see that could mean something are:
systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead
this is harmless but you can copy the file cont-sys.rme to cont-sys.tex and tweak its content
I did not think so, but better safe as sorry.
pdfTeX warning: pdftex: no GlyphToUnicode entry has been inserted yet!
But I do not know if that is a problem.
The pfd is made with: texexec --automp flowchart
Without the --automp I get a message about mpost.
Is mpost run or not? Your code looks ok and generates an image here, so it
looks like mpost is not run on your system.
I tried to make it after running 'texexec --make metafun'. It is still not run. I get: systems : begin file flowchart at line 3 (./flowchart-flw-1.tmp) (./flowchart-flw-1.tmp) (./flowchart-flw-1.tmp)sh: mpost: opdracht niet gevonden
locate mpost gives: /home/cecil/ConTeXt/tex/texmf-linux/bin/mpost /home/cecil/ConTeXt/tex/texmf/metapost/base/mpost.mp /usr/lib/texmf/doc/man/man1/mpost.man1.pdf /usr/share/doc/packages/libSDL-devel/html/sdlsempost.html /usr/share/pstoedit/mpost.fmp
You pdftex is from texlive, but you do not have a metapost executable from texlive. Either install metapost in texlive or use minimals (You already seem to have the minimals installed. You need to run "source ~/ConTeXt/tex/setuptex" to add the minimals' binaries to the path). Aditya
2010/11/19 Aditya Mahajan
You pdftex is from texlive, but you do not have a metapost executable from texlive. Either install metapost in texlive or use minimals (You already seem to have the minimals installed. You need to run "source ~/ConTeXt/tex/setuptex" to add the minimals' binaries to the path).
Mpost is still not found. -- Cecil Westerhof
On 19-11-2010 7:12, Cecil Westerhof wrote:
mpost: opdracht niet gevonden
so mpost is not your system
locate mpost gives: /home/cecil/ConTeXt/tex/texmf-linux/bin/mpost /home/cecil/ConTeXt/tex/texmf/metapost/base/mpost.mp /usr/lib/texmf/doc/man/man1/mpost.man1.pdf /usr/share/doc/packages/libSDL-devel/html/sdlsempost.html /usr/share/pstoedit/mpost.fmp
Trying alias mpost=/home/cecil/ConTeXt/tex/texmf-linux/bin/mpost does not make a difference.
are the permissions right? can you run mpost from the prompt Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
On 19-11-2010 9:23, Cecil Westerhof wrote:
2010/11/19 Hans Hagen
can you run mpost from the prompt
Yes, that gives: Sorry, I can't find that mem file; will try PLAIN. I can't find the PLAIN mem file!
that's real weird in the tex live cnf file I see shell_escape_commands = \ bibtex,bibtex8,\ kpsewhich,\ makeindex,\ repstopdf,\ and for some reason mpost is not in there, can you check that? (or set shell_escape = t instead of p) ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
2010/11/19 Hans Hagen
can you run mpost from the prompt
Yes, that gives: Sorry, I can't find that mem file; will try PLAIN. I can't find the PLAIN mem file!
that's real weird
in the tex live cnf file I see
shell_escape_commands = \ bibtex,bibtex8,\ kpsewhich,\ makeindex,\ repstopdf,\
and for some reason mpost is not in there, can you check that?
(or set shell_escape = t instead of p)
I only find the following .cnf files: ConTeXt/tex/texmf-context/web2c/context.cnf ConTeXt/tex/texmf/web2c/texmf.cnf Both do not contain shell_escape_commands. They have: shell_escape = t %openout_any = a openout_any = p openin_any = a parse_first_line = f allow_multiple_suffixes = f Do I need to make a texlive.cnf file? -- Cecil Westerhof
On 20-11-2010 6:04, Cecil Westerhof wrote:
2010/11/19 Hans Hagen
can you run mpost from the prompt
Yes, that gives: Sorry, I can't find that mem file; will try PLAIN. I can't find the PLAIN mem file!
that's real weird
in the tex live cnf file I see
shell_escape_commands = \ bibtex,bibtex8,\ kpsewhich,\ makeindex,\ repstopdf,\
and for some reason mpost is not in there, can you check that?
(or set shell_escape = t instead of p)
I only find the following .cnf files: ConTeXt/tex/texmf-context/web2c/context.cnf ConTeXt/tex/texmf/web2c/texmf.cnf
so you have only minimals ... and there all is set up to run mp runtime strange that no one else has this problem of not finding mpost in the binpath then Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
2010/11/20 Hans Hagen
so you have only minimals ... and there all is set up to run mp runtime
Should I install more?
strange that no one else has this problem of not finding mpost in the binpath then
Proberly something wrong with my installation, but that is only part of the problem. I installed ConTeXt on another computer. Here metapost is found, but still when trying to create a flowchart, only the text is generated. It is reproducable. When giving: \usemodule[chart] \starttext \startFLOWchart[cells] \startFLOWcell \name {first} \location {1,1} \shape {singledocument} \text {not really a document} \stopFLOWcell \stopFLOWchart \FLOWchart[cells] \stoptext To http://live.contextgarden.net/, then there is also only text. And when I take from http://wiki.contextgarden.net/Flow_Charts: \usemodule[chart] \setupFLOWcharts[height=3\lineheight] \startFLOWchart[example] \startFLOWcell \name {flow} \location {1,1} \text {Flow} \connection [rl] {chart} \stopFLOWcell \startFLOWcell \name {chart} \location{2,1} \text {Charts} \stopFLOWcell \stopFLOWchart \FLOWchart[example] And feed it to http://live.contextgarden.net/, I also only see text and not the flowchart itself. -- Cecil Westerhof
On Sat, 20 Nov 2010, Cecil Westerhof wrote:
To http://live.contextgarden.net/, then there is also only text.
contextgarden does not have write18 enabled. So, to get MP graphics, you need to add \runMPgraphicsfalse on the top of your file. In the minimals, write18 is enabled, so you do not need that line. I do not know why metapost is not part of your minimals installation. Aditya
I do not know what happens. With your sample code I get:
With ConTeXt ver: 2010.11.20 12:51 MKII fmt: 2010.11.20 int: english/english
.../lua64/tex/texmf-context/tex/context/base/m-chart.mkii
XML : loading flowchart support
))
Fatal error: catcode push/pop mismatch. Fix this!
\wait=
/Users/willi/Documents/TEXdata/TEST/test-flowchart.tex:23: Emergency stop.
2010/11/20 Hans Hagen
so you have only minimals ... and there all is set up to run mp runtime
Should I install more?
strange that no one else has this problem of not finding mpost in the binpath then
Proberly something wrong with my installation, but that is only part of the problem. I installed ConTeXt on another computer. Here metapost is found, but still when trying to create a flowchart, only the text is generated. It is reproducable. When giving: \usemodule[chart]
\starttext
\startFLOWchart[cells] \startFLOWcell \name {first} \location {1,1} \shape {singledocument} \text {not really a document} \stopFLOWcell
\stopFLOWchart
\FLOWchart[cells]
\stoptext
To http://live.contextgarden.net/, then there is also only text.
And when I take from http://wiki.contextgarden.net/Flow_Charts:
\usemodule[chart] \setupFLOWcharts[height=3\lineheight]
\startFLOWchart[example] \startFLOWcell \name {flow} \location {1,1} \text {Flow} \connection [rl] {chart} \stopFLOWcell \startFLOWcell \name {chart} \location{2,1} \text {Charts} \stopFLOWcell \stopFLOWchart \FLOWchart[example]
And feed it to http://live.contextgarden.net/, I also only see text and not the flowchart itself.
-- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
Hi all, As a matter of fact with any document using the chart module, mkii stops with \wait= This happens with the following minimal test, for example: %%% begin bug-chart.tex \usemodule[chart] \startFLOWchart[cells] \startFLOWcell \location {1,1} \text{This is just a test} \stopFLOWcell \stopFLOWchart \starttext \FLOWchart[cells] \stoptext %%% end bug-chart.tex However with mkiv, everything is fine. For you information, I tested the above with the Minimals, ConTeXt ver: 2010.11.18 19:47 MKII fmt: 2010.11.19 int: english/english, on MacOS X 10.6.5. Best regards: OK On 20 nov. 2010, at 21:26, Willi Egger wrote:
I do not know what happens. With your sample code I get:
With ConTeXt ver: 2010.11.20 12:51 MKII fmt: 2010.11.20 int: english/english
.../lua64/tex/texmf-context/tex/context/base/m-chart.mkii XML : loading flowchart support ))
Fatal error: catcode push/pop mismatch. Fix this!
\wait= /Users/willi/Documents/TEXdata/TEST/test-flowchart.tex:23: Emergency stop.
\wait ->\begingroup \read 16 to \wait \endgroup \showcatcodenestingerror ...atch. Fix this!}\wait \end \immediate \write 16{} \popcatcodetable ...evel \showcatcodenestingerror \else \expandafter \catcod...
\stopreadingfile ->\endrestorecatcodes \the \everystopreadingfile \global \a... <argument> ...dousemodules \f!moduleprefix {chart} \dododousemodules \f!priva... ... l.23 \starttext ...
Willi On 20 Nov 2010, at 17:08, Cecil Westerhof wrote:
2010/11/20 Hans Hagen
so you have only minimals ... and there all is set up to run mp runtime
Should I install more?
strange that no one else has this problem of not finding mpost in the binpath then
Proberly something wrong with my installation, but that is only part of the problem. I installed ConTeXt on another computer. Here metapost is found, but still when trying to create a flowchart, only the text is generated. It is reproducable. When giving: \usemodule[chart]
\starttext
\startFLOWchart[cells] \startFLOWcell \name {first} \location {1,1} \shape {singledocument} \text {not really a document} \stopFLOWcell
\stopFLOWchart
\FLOWchart[cells]
\stoptext
To http://live.contextgarden.net/, then there is also only text.
And when I take from http://wiki.contextgarden.net/Flow_Charts:
\usemodule[chart] \setupFLOWcharts[height=3\lineheight]
\startFLOWchart[example] \startFLOWcell \name {flow} \location {1,1} \text {Flow} \connection [rl] {chart} \stopFLOWcell \startFLOWcell \name {chart} \location{2,1} \text {Charts} \stopFLOWcell \stopFLOWchart \FLOWchart[example]
And feed it to http://live.contextgarden.net/, I also only see text and not the flowchart itself.
-- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
2010/11/20 Hans Hagen
so you have only minimals ... and there all is set up to run mp runtime
strange that no one else has this problem of not finding mpost in the binpath then
Found the problem. The first time I used ConTeXt it was not in the repository and I downloaded it. Now it is and I installed it from the repository (openSUSE). But when doing this metapost is not installed. So I installed texlive-bin-metapost and texlive-metapost. Now it works. Are there any other packages that would be smart to install? -- Cecil Westerhof
participants (5)
-
Aditya Mahajan -
Cecil Westerhof -
Hans Hagen -
Otared Kavian -
Willi Egger