\bigr bracket missing in antykwa
Hi, \bigr\} does not give me anything while using antykwa fonts. \big\} also does not work. \right\} works correctly. Is there something missing in the typescripts? I have no idea on how fonts work, so can not debug the problem. \usetypescript [antykwa-torunska][ec] \setupbodyfont[antykwa, 11pt] \starttext $\bigl\{ a \bigr\}$ \blank $\big\{ a \big\}$ \blank $\left\{ a \right\}$ \blank \stoptext ConTeXt ver: 2006.04.07 11:24 fmt: 2006.4.9 int: english mes: english No warning message is generated in the log file. Aditya -- Aditya Mahajan, EECS Systems, University of Michigan http://www.eecs.umich.edu/~adityam || Ph: 7342624008
Aditya Mahajan wrote:
Hi, \bigr\} does not give me anything while using antykwa fonts. \big\} also does not work. \right\} works correctly. Is there something missing in the typescripts? I have no idea on how fonts work, so can not debug the problem.
\usetypescript [antykwa-torunska][ec]
\setupbodyfont[antykwa, 11pt]
\starttext $\bigl\{ a \bigr\}$ \blank $\big\{ a \big\}$ \blank $\left\{ a \right\}$ \blank \stoptext
ConTeXt ver: 2006.04.07 11:24 fmt: 2006.4.9 int: english mes: english
No warning message is generated in the log file.
i remember that mojca looked into the polish fonts and math and detected some problems (and communicated it to the authors) Hans -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
On 4/14/06, Hans Hagen wrote:
Aditya Mahajan wrote:
Hi, \bigr\} does not give me anything while using antykwa fonts. \big\} also does not work. \right\} works correctly. Is there something missing in the typescripts? I have no idea on how fonts work, so can not debug the problem.
\usetypescript [antykwa-torunska][ec]
\setupbodyfont[antykwa, 11pt]
\starttext $\bigl\{ a \bigr\}$ \blank $\big\{ a \big\}$ \blank $\left\{ a \right\}$ \blank \stoptext
ConTeXt ver: 2006.04.07 11:24 fmt: 2006.4.9 int: english mes: english
No warning message is generated in the log file.
i remember that mojca looked into the polish fonts and math and detected some problems (and communicated it to the authors)
That was something else (characters were actually missing/wrong in both Iwona pfb & tfm). I'm only guessing now, but I suspect that the following definition for math in lucida are not pointless (and such definitions are missing for antykwa): \def\LBRbig {\@@dobig{8.20}} ... \startrawmathcollection[lbr] \definemathcommand [big] {\LBRbig} I don't understand why math has to be redefined almost completely for every font that one wants to use, but I'm no TeX expert anyway, so I can't really judge or do anything about it. Mojca
Mojca Miklavec wrote:
On 4/14/06, Hans Hagen wrote:
Aditya Mahajan wrote:
Hi, \bigr\} does not give me anything while using antykwa fonts. \big\} also does not work. \right\} works correctly. Is there something missing in the typescripts? I have no idea on how fonts work, so can not debug the problem.
\usetypescript [antykwa-torunska][ec]
\setupbodyfont[antykwa, 11pt]
\starttext $\bigl\{ a \bigr\}$ \blank $\big\{ a \big\}$ \blank $\left\{ a \right\}$ \blank \stoptext
ConTeXt ver: 2006.04.07 11:24 fmt: 2006.4.9 int: english mes: english
No warning message is generated in the log file.
i remember that mojca looked into the polish fonts and math and detected some problems (and communicated it to the authors)
That was something else (characters were actually missing/wrong in both Iwona pfb & tfm).
I'm only guessing now, but I suspect that the following definition for math in lucida are not pointless (and such definitions are missing for antykwa):
\def\LBRbig {\@@dobig{8.20}} ... \startrawmathcollection[lbr]
\definemathcommand [big] {\LBRbig}
I don't understand why math has to be redefined almost completely for every font that one wants to use, but I'm no TeX expert anyway, so I can't really judge or do anything about it.
afaik the antikwa cum suis use the normal tex encoding but i may be wrong ... is the character in the font? Hans -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Hans Hagen wrote:
Mojca Miklavec wrote:
On 4/14/06, Hans Hagen wrote:
Aditya Mahajan wrote:
Hi, \bigr\} does not give me anything while using antykwa fonts. \big\} also does not work. \right\} works correctly. Is there something missing in the typescripts? I have no idea on how fonts work, so can not debug the problem.
\usetypescript [antykwa-torunska][ec]
\setupbodyfont[antykwa, 11pt]
\starttext $\bigl\{ a \bigr\}$ \blank $\big\{ a \big\}$ \blank $\left\{ a \right\}$ \blank \stoptext
afaik the antikwa cum suis use the normal tex encoding but i may be wrong ...
is the character in the font?
I don't notice any empty slots (unless the mistake lies in rm-antt: I don't know how this one is supposed to look like), but the following example fails in LaTeX too, so perhaps the problem really lies in the font, but where??? \documentclass{article} \usepackage[math]{anttor} \begin{document} \def\x#1{\left\{#1\left\}\vbox to #1pt{}\right.\right.} $$\x{9.16}\x{9.17}$$ \end{document} Almost equivalent counterpart in ConTeXt: \usetypescript[antykwa-torunska][ec] \setupbodyfont[antykwa] \starttext \def\x#1{\left\{#1\left\}\vbox to #1\bodyfontsize{}\right.\right.} \startformula \x{0.8088}\x{0.8089}\x{0.916}\x{0.917} \stopformula \loadmapfile[antt.map] \showfont[ex-anttr] \showfont[mi-anttri] \showfont[sy-anttrz] \showfont[rm-anttr] \stoptext Mojca
Mojca Miklavec wrote:
Hans Hagen wrote:
Mojca Miklavec wrote:
On 4/14/06, Hans Hagen wrote:
Aditya Mahajan wrote:
Hi, \bigr\} does not give me anything while using antykwa fonts. \big\} also does not work. \right\} works correctly. Is there something missing in the typescripts? I have no idea on how fonts work, so can not debug the problem.
\usetypescript [antykwa-torunska][ec]
\setupbodyfont[antykwa, 11pt]
\starttext $\bigl\{ a \bigr\}$ \blank $\big\{ a \big\}$ \blank $\left\{ a \right\}$ \blank \stoptext
afaik the antikwa cum suis use the normal tex encoding but i may be wrong ...
is the character in the font?
I don't notice any empty slots (unless the mistake lies in rm-antt: I don't know how this one is supposed to look like), but the following example fails in LaTeX too, so perhaps the problem really lies in the font, but where???
\documentclass{article} \usepackage[math]{anttor}
\begin{document} \def\x#1{\left\{#1\left\}\vbox to #1pt{}\right.\right.} $$\x{9.16}\x{9.17}$$ \end{document}
Almost equivalent counterpart in ConTeXt:
\usetypescript[antykwa-torunska][ec] \setupbodyfont[antykwa]
\starttext
\def\x#1{\left\{#1\left\}\vbox to #1\bodyfontsize{}\right.\right.} \startformula \x{0.8088}\x{0.8089}\x{0.916}\x{0.917} \stopformula
\loadmapfile[antt.map]
not needed -)
\showfont[ex-anttr]
\stoptext
well, i traced back the way this brace ends up in the pdf file and this is what i observe: - the antt and cm ex tfm files have exactly the same values (although antt is 7 bit safe) - so the problem must be in the map file and/or encoding - and, surprise, encantt-ex[ /parenleftbig /parenrightbig /bracketleftbig /bracketrightbig /floorleftbig /floorrightbig /ceilingleftbig /ceilingrightbig /braceleftbig /.notdef /angbracketleftbig the bracerightbig is undefined here i suspect that there is some bug in the scripts that generate these files so let's feed this back to jacko/janusz; you need to patch: antt-ex.enc iwona.enc kurier.enc (maybe an intermediate patch in the tex live repository is ok for the moment) /braceleftbig /bracerightbig the fonts themselves are ok Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
On Mon, 17 Apr 2006, Hans Hagen wrote:
well, i traced back the way this brace ends up in the pdf file and this is what i observe:
- the antt and cm ex tfm files have exactly the same values (although antt is 7 bit safe) - so the problem must be in the map file and/or encoding - and, surprise,
encantt-ex[ /parenleftbig /parenrightbig /bracketleftbig /bracketrightbig /floorleftbig /floorrightbig /ceilingleftbig /ceilingrightbig /braceleftbig /.notdef /angbracketleftbig
the bracerightbig is undefined here
i suspect that there is some bug in the scripts that generate these files so let's feed this back to jacko/janusz; you need to patch:
antt-ex.enc iwona.enc kurier.enc
So shall I send a bug report to them with a summary of this thread or have you already done that?
(maybe an intermediate patch in the tex live repository is ok for the moment)
/braceleftbig /bracerightbig
the fonts themselves are ok
For my document, I changed the sizes to \bigg (or normal size). Aditya -- Aditya Mahajan, EECS Systems, University of Michigan http://www.eecs.umich.edu/~adityam || Ph: 7342624008
Aditya Mahajan wrote:
So shall I send a bug report to them with a summary of this thread or have you already done that?
i cd'd Jacko and Janusz so it's ok Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
participants (3)
-
Aditya Mahajan -
Hans Hagen -
Mojca Miklavec