Displayed formula inside paragraph change vertical space before the paragraph

Mikael P. Sundqvist

13 Jan 2017 13 Jan '17

6:13 a.m.

Dear list, please have a look at the output (ctx-example13.pdf) of the somewhat ugly example below. The vertical space before the paragraph with the displayed formula is almost none. If I remove the % signs before and after the formula, the space before the paragraph looks ok. Do I have to enter those empty lines? Is this a bug or feature? (I use a recently updated standalone) /Mikael \starttext Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla \stoptext

Attachments:

ctx-example13.pdf (application/pdf — 7.3 KB)
ctx-example13-2.pdf (application/pdf — 7.3 KB)

Show replies by date

Otared Kavian

13 Jan 13 Jan

5 p.m.

New subject: Displayed formula inside paragraph change vertical space before the paragraph

Hi Mikael, I tested your example but I see no difference in the outputs, with, or without a blank line between the text and the displayed formula. I am using ConteXt 2016.12.28 17:55 MKIV beta. Best regards: OK

...

On 13 Jan 2017, at 14:13, Mikael P. Sundqvist wrote:

Dear list,

please have a look at the output (ctx-example13.pdf) of the somewhat ugly example below. The vertical space before the paragraph with the displayed formula is almost none. If I remove the % signs before and after the formula, the space before the paragraph looks ok.

Do I have to enter those empty lines? Is this a bug or feature?

(I use a recently updated standalone)

/Mikael

\starttext

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

\stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Mikael P. Sundqvist

14 Jan 14 Jan

12:32 a.m.

New subject: Displayed formula inside paragraph change vertical space before the paragraph

On Sat, Jan 14, 2017 at 1:00 AM, Otared Kavian wrote:

...

Hi Mikael,

I tested your example but I see no difference in the outputs, with, or without a blank line between the text and the displayed formula. I am using ConteXt 2016.12.28 17:55 MKIV beta.

Best regards: OK

...
On 13 Jan 2017, at 14:13, Mikael P. Sundqvist wrote:

Dear list,

please have a look at the output (ctx-example13.pdf) of the somewhat ugly example below. The vertical space before the paragraph with the displayed formula is almost none. If I remove the % signs before and after the formula, the space before the paragraph looks ok.

Do I have to enter those empty lines? Is this a bug or feature?

(I use a recently updated standalone)

/Mikael

\starttext

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

\stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Thank you for testing, Otared. I still have the same problem with a freshly installed ConTeXt ver: 2016.12.28 17:55 MKIV beta fmt: 2017.1.14 int: english/english /Mikael

Mikael P. Sundqvist

15 Jan 15 Jan

11:29 a.m.

New subject: Displayed formula inside paragraph change vertical space before the paragraph

On Sat, Jan 14, 2017 at 8:32 AM, Mikael P. Sundqvist wrote:

...

On Sat, Jan 14, 2017 at 1:00 AM, Otared Kavian wrote:

...
Hi Mikael,

I tested your example but I see no difference in the outputs, with, or without a blank line between the text and the displayed formula. I am using ConteXt 2016.12.28 17:55 MKIV beta.

Best regards: OK

...
On 13 Jan 2017, at 14:13, Mikael P. Sundqvist wrote:

Dear list,

please have a look at the output (ctx-example13.pdf) of the somewhat ugly example below. The vertical space before the paragraph with the displayed formula is almost none. If I remove the % signs before and after the formula, the space before the paragraph looks ok.

Do I have to enter those empty lines? Is this a bug or feature?

(I use a recently updated standalone)

/Mikael

\starttext

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

\stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Thank you for testing, Otared.

I still have the same problem with a freshly installed

ConTeXt ver: 2016.12.28 17:55 MKIV beta fmt: 2017.1.14 int: english/english

/Mikael

Am I the only one affected by this? Can someone confirm that they see the same problem? Thanks, Mikael

Otared Kavian

16 Jan 16 Jan

2:51 a.m.

New subject: Displayed formula inside paragraph change vertical space before the paragraph

Hi Mikael, To make sure we are talking about the same issue, here are the outputs obtained with and without blank lines around \startformula…\stopformula: Can you please send me too your outputs so I can compare with mines? Best regards: OK

...

On 15 Jan 2017, at 19:29, Mikael P. Sundqvist wrote:

On Sat, Jan 14, 2017 at 8:32 AM, Mikael P. Sundqvist wrote:

...
On Sat, Jan 14, 2017 at 1:00 AM, Otared Kavian wrote:

...
Hi Mikael,

I tested your example but I see no difference in the outputs, with, or without a blank line between the text and the displayed formula. I am using ConteXt 2016.12.28 17:55 MKIV beta.

Best regards: OK

...
On 13 Jan 2017, at 14:13, Mikael P. Sundqvist wrote:

Dear list,

please have a look at the output (ctx-example13.pdf) of the somewhat ugly example below. The vertical space before the paragraph with the displayed formula is almost none. If I remove the % signs before and after the formula, the space before the paragraph looks ok.

Do I have to enter those empty lines? Is this a bug or feature?

(I use a recently updated standalone)

/Mikael

\starttext

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

\stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Thank you for testing, Otared.

I still have the same problem with a freshly installed

ConTeXt ver: 2016.12.28 17:55 MKIV beta fmt: 2017.1.14 int: english/english

/Mikael

Am I the only one affected by this? Can someone confirm that they see the same problem?

Thanks,

Mikael ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Mikael P. Sundqvist

3:12 a.m.

New subject: Displayed formula inside paragraph change vertical space before the paragraph

On Mon, Jan 16, 2017 at 10:51 AM, Otared Kavian wrote:

...

Hi Mikael,

To make sure we are talking about the same issue, here are the outputs obtained with and without blank lines around \startformula…\stopformula: Can you please send me too your outputs so I can compare with mines?

Best regards: OK

...
On 15 Jan 2017, at 19:29, Mikael P. Sundqvist wrote:

On Sat, Jan 14, 2017 at 8:32 AM, Mikael P. Sundqvist wrote:

...
On Sat, Jan 14, 2017 at 1:00 AM, Otared Kavian wrote:

...
Hi Mikael,

I tested your example but I see no difference in the outputs, with, or without a blank line between the text and the displayed formula. I am using ConteXt 2016.12.28 17:55 MKIV beta.

Best regards: OK

...
On 13 Jan 2017, at 14:13, Mikael P. Sundqvist wrote:

Dear list,

please have a look at the output (ctx-example13.pdf) of the somewhat ugly example below. The vertical space before the paragraph with the displayed formula is almost none. If I remove the % signs before and after the formula, the space before the paragraph looks ok.

Do I have to enter those empty lines? Is this a bug or feature?

(I use a recently updated standalone)

/Mikael

\starttext

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

\stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Thank you for testing, Otared.

I still have the same problem with a freshly installed

ConTeXt ver: 2016.12.28 17:55 MKIV beta fmt: 2017.1.14 int: english/english

/Mikael

Am I the only one affected by this? Can someone confirm that they see the same problem?

Thanks,

Mikael ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Dear Otared, First of all, thank you for testing. The files were attached to my first email. In your attached example I see the same problem in the "without" example. This example might be better: \starttext Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla The space between this paragraph and the previous one is too small. Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla \stoptext The result is attached. /Mikael

Otared Kavian

4:56 a.m.

New subject: Displayed formula inside paragraph change vertical space before the paragraph

Hi Mikael, Thanks for making it clear to me: I was looking for the changes in vertical spacing around the formula… Now it is clear that there is a bug in the vertical spacing: when I typeset your example with mkii or mkiv ConTeXt Version 2016.05.17 from TeXLive, the issue is not present, as one may see from the attached output. Maybe you should open a new thread with a title like « Bug in vertical spacing of paragraphs » so that Hans may see it more easily. Best regards: OK

...

On 16 Jan 2017, at 11:12, Mikael P. Sundqvist wrote:

On Mon, Jan 16, 2017 at 10:51 AM, Otared Kavian wrote:

...
Hi Mikael,

To make sure we are talking about the same issue, here are the outputs obtained with and without blank lines around \startformula…\stopformula: Can you please send me too your outputs so I can compare with mines?

Best regards: OK

...
On 15 Jan 2017, at 19:29, Mikael P. Sundqvist wrote:

On Sat, Jan 14, 2017 at 8:32 AM, Mikael P. Sundqvist wrote:

...
On Sat, Jan 14, 2017 at 1:00 AM, Otared Kavian wrote:

...
Hi Mikael,

I tested your example but I see no difference in the outputs, with, or without a blank line between the text and the displayed formula. I am using ConteXt 2016.12.28 17:55 MKIV beta.

Best regards: OK

...
On 13 Jan 2017, at 14:13, Mikael P. Sundqvist wrote:

Dear list,

please have a look at the output (ctx-example13.pdf) of the somewhat ugly example below. The vertical space before the paragraph with the displayed formula is almost none. If I remove the % signs before and after the formula, the space before the paragraph looks ok.

Do I have to enter those empty lines? Is this a bug or feature?

(I use a recently updated standalone)

/Mikael

\starttext

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

\stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Thank you for testing, Otared.

I still have the same problem with a freshly installed

ConTeXt ver: 2016.12.28 17:55 MKIV beta fmt: 2017.1.14 int: english/english

/Mikael

Am I the only one affected by this? Can someone confirm that they see the same problem?

Thanks,

Mikael ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Dear Otared,

First of all, thank you for testing.

The files were attached to my first email. In your attached example I see the same problem in the "without" example. This example might be better:

\starttext

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

The space between this paragraph and the previous one is too small. Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla % \startformula k>1000\implies |1/k-0|=1/k<1/1000=0.001. \stopformula % Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla Bla bla bla bla bla bla bla bla bla

\stoptext

The result is attached.

/Mikael ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________

Hans Hagen

2:31 p.m.

New subject: Displayed formula inside paragraph change vertical space before the paragraph

On 1/16/2017 12:56 PM, Otared Kavian wrote:

...

Hi Mikael,

Thanks for making it clear to me: I was looking for the changes in vertical spacing around the formula… Now it is clear that there is a bug in the vertical spacing: when I typeset your example with mkii or mkiv ConTeXt Version 2016.05.17 from TeXLive, the issue is not present, as one may see from the attached output.

Maybe you should open a new thread with a title like « Bug in vertical spacing of paragraphs » so that Hans may see it more easily.

fixed in next beta ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2738

Age (days ago)

2741

Last active (days ago)

List overview

Download

7 comments

3 participants

participants (3)

Hans Hagen
Mikael P. Sundqvist
Otared Kavian

Displayed formula inside paragraph change vertical space before the paragraph

tags

participants (3)