Hello, I've got some strange behavior with verbatim text : The lines of the verbatim text got two different numbering that overwrite each other. I think that I've read something about this but I don't find it in the mail archive. If I remember correctly, there is a bug into the line number routine when you use a verbatim text into a column set with the paragraph command and when the verbatim text is enclosed into a frame. Regards, Pierre-François. -- Bonnefoi Pierre-Francois | E-mail : bonnefoi@unilim.fr http://libpfb.so/ Universite de Limoges, Laboratoire XLIM | Tel : 06 28 18 03 38 123 av Albert Thomas | Mrs. Peel, we're needed... 87060 Limoges CEDEX - FRANCE | The Avengers.
Hello, I've tracked down the problem : \def\numeroLigneCode#1{\inframed[width=fit,strut=yes,frame=off,rightframe=on]{\switchtobodyfont[9pt]#1}} \definetyping[code][numbering=line,page=yes,bodyfont=9pt,before={% \begingroup% \setuplinenumbering[location=text,align=left,style=\tt,command=\numeroLigneCode,distance=-.5em,width=2em]% },after={\endgroup},tab=2] \starttext \startcode one two three \stopcode \stoptext The result is that the option "command=\numeroLigneCode" is oddly ignored. If I put the command "\setuplinenumbering[location=text,align=left,style=\tt,command=\numeroLigneCode,distance=-.5em,width=2em]" outside of the definition of the verbatim zone "code", it works. This behavior seems rather strange and when it collides with using verbatim zone enclosed in "framedtext", it leads to two line numbering overwriting each other. regards, Pierre-François.
On 28 Apr 2015, at 23:43, Pierre-François Bonnefoi
wrote: Hello,
I've got some strange behavior with verbatim text :
The lines of the verbatim text got two different numbering that overwrite each other.
I think that I've read something about this but I don't find it in the mail archive.
If I remember correctly, there is a bug into the line number routine when you use a verbatim text into a column set with the paragraph command and when the verbatim text is enclosed into a frame.
Regards, Pierre-François.
-- Bonnefoi Pierre-Francois | E-mail : bonnefoi@unilim.fr mailto:bonnefoi@unilim.fr http://libpfb.so/ http://libpfb.so/ Universite de Limoges, Laboratoire XLIM | Tel : 06 28 18 03 38 123 av Albert Thomas | Mrs. Peel, we're needed... 87060 Limoges CEDEX - FRANCE | The Avengers.
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
-- Bonnefoi Pierre-Francois | E-mail : bonnefoi@unilim.fr http://libpfb.so/ Universite de Limoges, Laboratoire XLIM | Tel : 06 28 18 03 38 123 av Albert Thomas | Mrs. Peel, we're needed... 87060 Limoges CEDEX - FRANCE | The Avengers.
Am 29.04.2015 um 15:05 schrieb Pierre-François Bonnefoi
: Hello,
I've tracked down the problem :
\def\numeroLigneCode#1{\inframed[width=fit,strut=yes,frame=off,rightframe=on]{\switchtobodyfont[9pt]#1}}
\definetyping[code][numbering=line,page=yes,bodyfont=9pt,before={% \begingroup% \setuplinenumbering[location=text,align=left,style=\tt,command=\numeroLigneCode,distance=-.5em,width=2em]% },after={\endgroup},tab=2] \starttext \startcode one two three \stopcode
\stoptext
The result is that the option "command=\numeroLigneCode" is oddly ignored.
If I put the command "\setuplinenumbering[location=text,align=left,style=\tt,command=\numeroLigneCode,distance=-.5em,width=2em]" outside of the definition of the verbatim zone "code", it works.
This behavior seems rather strange and when it collides with using verbatim zone enclosed in "framedtext", it leads to two line numbering overwriting each other.
\defineframed[numeroLigneCode][location=low,width=fit,strut=yes,frame=off,rightframe=on] \definetyping[code][numbering=line,page=yes,bodyfont=9pt,tab=2] \setuplinenumbering[code][location=text,align=left,style={\switchtobodyfont[9pt,tt]},command=\numeroLigneCode,distance=-.5em,width=2em] \starttext \startcode one two three \stopcode \stoptext Wolfgang
Thank you very much for your solution. When using it into a paragraph, the line number disappears : \defineframed[numeroLigneCode][location=low,width=fit,strut=yes,frame=off,rightframe=on] \definetyping[code][numbering=line,page=yes,bodyfont=9pt,tab=2] \setuplinenumbering[code][location=text,align=left,style={\switchtobodyfont[9pt,tt]},command=\numeroLigneCode,distance=-.5em,width=2em] \defineparagraphs[TwoCols][n=2,before=,after=] \starttext \startTwoCols \startcode one two three \stopcode \TwoCols hum \stopTwoCols \stoptext I've tried to use the command "\definelinenumbering" without success. I don't know what happened...
On 29 Apr 2015, at 16:40, Wolfgang Schuster
wrote: \defineframed[numeroLigneCode][location=low,width=fit,strut=yes,frame=off,rightframe=on]
\definetyping[code][numbering=line,page=yes,bodyfont=9pt,tab=2]
\setuplinenumbering[code][location=text,align=left,style={\switchtobodyfont[9pt,tt]},command=\numeroLigneCode,distance=-.5em,width=2em]
-- Bonnefoi Pierre-Francois | E-mail : bonnefoi@unilim.fr http://libpfb.so/ Universite de Limoges, Laboratoire XLIM | Tel : 06 28 18 03 38 123 av Albert Thomas | Mrs. Peel, we're needed... 87060 Limoges CEDEX - FRANCE | The Avengers.
Am 29.04.2015 um 17:00 schrieb Pierre-François Bonnefoi
: Thank you very much for your solution.
When using it into a paragraph, the line number disappears :
\defineframed[numeroLigneCode][location=low,width=fit,strut=yes,frame=off,rightframe=on]
\definetyping[code][numbering=line,page=yes,bodyfont=9pt,tab=2]
\setuplinenumbering[code][location=text,align=left,style={\switchtobodyfont[9pt,tt]},command=\numeroLigneCode,distance=-.5em,width=2em]
\defineparagraphs[TwoCols][n=2,before=,after=]
\starttext \startTwoCols \startcode one two three \stopcode \TwoCols hum \stopTwoCols \stoptext
I've tried to use the command "\definelinenumbering" without success.
I don't know what happened…
To add line numbers to text in a box some kind of post processing is necessary and the paragraphs environment doesn’t perform this yet but it can be added with a single line in the code. I don’t if there are side effect from this change and if this is the right place for the line but it works in the following example. \unprotect \def\typo_paragraphs_stop_cell_yes {\ifvmode \removelastskip \else \removeunwantedspaces \endstrut \endgraf \fi \paragraphsparameter\c!bottom \egroup % (2) % The following is necessary to show line numbers in a paragraphs environment \page_postprocessors_linenumbers_box\scratchbox \dontleavehmode\hbox{\raise\strutheight\box\scratchbox}% \endgroup} \protect \defineparagraphs[Test][n=2] \setuptyping[numbering=line,tab=no] \starttext \startparagraphs[Test] \startparagraphscell \input ward \starttyping One Two Three \stoptyping \stopparagraphscell \startparagraphscell Second column \stopparagraphscell \stopparagraphs \stoptext Wolfgang
Hello, thank you for your solution. As I understand this code, it's a patch to some internal processing code, so I've integrated it in my environment file. The result is similar to the previous result : I've two columns paragraph, with a verbatim zone in the left column that gets two numbering : 1 to 25 then 26 to 50. If I change the numbering style with the command "\definelinenumbering" associated to the verbatim zone from the global numbering style, I get one numbering with the particular style and the other with the global style. I don't know if this gives insight into the process that occurs in the rendering engine. Thank you very much for your help, Pierre-François.
On 29 Apr 2015, at 18:51, Wolfgang Schuster
wrote: Am 29.04.2015 um 17:00 schrieb Pierre-François Bonnefoi
: Thank you very much for your solution.
When using it into a paragraph, the line number disappears :
\defineframed[numeroLigneCode][location=low,width=fit,strut=yes,frame=off,rightframe=on]
\definetyping[code][numbering=line,page=yes,bodyfont=9pt,tab=2]
\setuplinenumbering[code][location=text,align=left,style={\switchtobodyfont[9pt,tt]},command=\numeroLigneCode,distance=-.5em,width=2em]
\defineparagraphs[TwoCols][n=2,before=,after=]
\starttext \startTwoCols \startcode one two three \stopcode \TwoCols hum \stopTwoCols \stoptext
I've tried to use the command "\definelinenumbering" without success.
I don't know what happened…
To add line numbers to text in a box some kind of post processing is necessary and the paragraphs environment doesn’t perform this yet but it can be added with a single line in the code. I don’t if there are side effect from this change and if this is the right place for the line but it works in the following example.
\unprotect
\def\typo_paragraphs_stop_cell_yes {\ifvmode \removelastskip \else \removeunwantedspaces \endstrut \endgraf \fi \paragraphsparameter\c!bottom \egroup % (2) % The following is necessary to show line numbers in a paragraphs environment \page_postprocessors_linenumbers_box\scratchbox \dontleavehmode\hbox{\raise\strutheight\box\scratchbox}% \endgroup}
\protect
\defineparagraphs[Test][n=2]
\setuptyping[numbering=line,tab=no]
\starttext
\startparagraphs[Test]
\startparagraphscell
\input ward
\starttyping One Two Three \stoptyping
\stopparagraphscell
\startparagraphscell Second column \stopparagraphscell
\stopparagraphs
\stoptext
Wolfgang
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
-- Bonnefoi Pierre-Francois | E-mail : bonnefoi@unilim.fr http://libpfb.so/ Universite de Limoges, Laboratoire XLIM | Tel : 06 28 18 03 38 123 av Albert Thomas | Mrs. Peel, we're needed... 87060 Limoges CEDEX - FRANCE | The Avengers.
Am 30.04.2015 um 11:24 schrieb Pierre-François Bonnefoi
: Hello,
thank you for your solution.
As I understand this code, it's a patch to some internal processing code, so I've integrated it in my environment file.
The result is similar to the previous result :
I've two columns paragraph, with a verbatim zone in the left column that gets two numbering : 1 to 25 then 26 to 50.
If I change the numbering style with the command "\definelinenumbering" associated to the verbatim zone from the global numbering style, I get one numbering with the particular style and the other with the global style.
When you create custom typing environment context also creates a line numbering environment with the same name and to change its values you should use the \setuplinenumbering command and not \definelinenumbering.
I don't know if this gives insight into the process that occurs in the rendering engine.
Please make a minimal example with the problem. Wolfgang
participants (2)
-
Pierre-François Bonnefoi
-
Wolfgang Schuster