Thanks for the reply. On 1/12/2016, Hans Hagen wrote:

On 1/12/2016 9:33 PM, Romain Diss wrote:

...

Hi all,

I just downloaded the new beta and I can not launch context anymore. It complains it can't find a 'luat-exe.lua' file:

...

system > lua > loading of file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed: cannot open /opt/context/tex/texmf-context/tex/context/base/luat-exe.lua: No such file or directory resolvers > lua > loading file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed error loading file: luat-exe.lua (aborting)

As I can see, the 'base' directory has been split up into 'mkii' and 'mkiv' subdirs, so maybe a link has not been updated.

Context end up with this message:

...

This is LuaTeX, Version beta-0.87.0 (TeX Live 2016/dev) system commands enabled. (Fatal format file error; I'm stymied)

When I launch 'context --version', I get:

...

mtx-context | ConTeXt Process Management 0.62 mtx-context | main context file: /opt/context/tex/texmf-context/tex/context/base/context.mkiv mtx-context | context version: unknown, load error

i uploaded a version that reverts soem changes so that an older luatex works (we're still looking into the situation) anyway, this is unrelated to the mkii/mkiv sub path issue: i have no clue what happened at your end as i can update withou tproblems you can try to run mtxrun --generate and then update again I ran again the 'first-setup.sh' script to upload the new version. There do not seem to be any problem with the upload and installation. Anyway, I get the same errors, even after running 'mtxrun --generate' and updating again.

Does a log file or another tests can help to find the problem? All the best. -- Romain Diss

Le 13/01/2016, Hans Hagen a écrit

On 1/13/2016 12:01 AM, Romain Diss wrote:

...

On 1/12/2016, Hans Hagen wrote:

...

On 1/12/2016 9:33 PM, Romain Diss wrote:

...

I just downloaded the new beta and I can not launch context anymore. It complains it can't find a 'luat-exe.lua' file:

...

system > lua > loading of file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed: cannot open /opt/context/tex/texmf-context/tex/context/base/luat-exe.lua: No such file or directory resolvers > lua > loading file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed error loading file: luat-exe.lua (aborting)

is that file sompelace on the system? Yes, it is located in /opt/context/tex/texmf-context/tex/context/base/mkiv/luat-exe.lua

Concerning the 'context --version' error message, the 'context.mkiv' is also located in /opt/context/tex/texmf-context/tex/context/base/mkiv/ and not in /opt/context/tex/texmf-context/tex/context/base/ as printed in the output.

...

...

...

As I can see, the 'base' directory has been split up into 'mkii' and 'mkiv' subdirs, so maybe a link has not been updated. Context end up with this message:

...

This is LuaTeX, Version beta-0.87.0 (TeX Live 2016/dev) system commands enabled. (Fatal format file error; I'm stymied)

When I launch 'context --version', I get:

...

mtx-context | ConTeXt Process Management 0.62 mtx-context | main context file: /opt/context/tex/texmf-context/tex/context/base/context.mkiv mtx-context | context version: unknown, load error i uploaded a version that reverts soem changes so that an older luatex works (we're still looking into the situation) anyway, this is unrelated to the mkii/mkiv sub path issue: i have no clue what happened at your end as i can update withou tproblems you can try to run mtxrun --generate and then update again I ran again the 'first-setup.sh' script to upload the new version. There do not seem to be any problem with the upload and installation. Anyway, I get the same errors, even after running 'mtxrun --generate' and updating again.

Does a log file or another tests can help to find the problem?

-- Romain Diss

On 1/13/2016 1:22 AM, Romain Diss wrote:

...

Le 13/01/2016, Hans Hagen a écrit

...

On 1/13/2016 12:01 AM, Romain Diss wrote:

...

On 1/12/2016, Hans Hagen wrote:

...

On 1/12/2016 9:33 PM, Romain Diss wrote:

...

I just downloaded the new beta and I can not launch context anymore. It complains it can't find a 'luat-exe.lua' file: >system > lua > loading of file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed: > cannot open /opt/context/tex/texmf-context/tex/context/base/luat-exe.lua: No such file or directory >resolvers > lua > loading file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed >error loading file: luat-exe.lua (aborting)

is that file sompelace on the system? Yes, it is located in /opt/context/tex/texmf-context/tex/context/base/mkiv/luat-exe.lua

Concerning the 'context --version' error message, the 'context.mkiv' is also located in /opt/context/tex/texmf-context/tex/context/base/mkiv/ and not in /opt/context/tex/texmf-context/tex/context/base/ as printed in the output.

i'll upload a version with a bit more checking Don't know if it's already done but nothing changed on my side. I tried to create symbolic links of all base/mkiv/ files into base directory. Context is processing further but is stopped anyway. It complains it doesn't find 'page-otr.lua' although the link is done. I also noticed

Hi, Le 13/01/2016, Hans Hagen a écrit that context needed 'syst-rtp.mkiv' which I did not find in base/mkiv but in base/mkii. I do not know where to investigate more an I'm surprised I am the only one concerned by this bug. Is it possible that an environment variable could be responsible of this (I didn't change anything these last times). Thank you for help. -- Romain Diss

On 1/16/2016 12:14 AM, Romain Diss wrote:

Hi all,

Le 13/01/2016, Hans Hagen a écrit

...

On 1/13/2016 1:22 AM, Romain Diss wrote:

...

Le 13/01/2016, Hans Hagen a écrit

...

On 1/13/2016 12:01 AM, Romain Diss wrote:

...

On 1/12/2016, Hans Hagen wrote:

...

On 1/12/2016 9:33 PM, Romain Diss wrote: > I just downloaded the new beta and I can not launch context anymore. It > complains it can't find a 'luat-exe.lua' file: >> system > lua > loading of file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed: >> cannot open /opt/context/tex/texmf-context/tex/context/base/luat-exe.lua: No such file or directory >> resolvers > lua > loading file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed >> error loading file: luat-exe.lua (aborting)

is that file sompelace on the system? Yes, it is located in /opt/context/tex/texmf-context/tex/context/base/mkiv/luat-exe.lua

Concerning the 'context --version' error message, the 'context.mkiv' is also located in /opt/context/tex/texmf-context/tex/context/base/mkiv/ and not in /opt/context/tex/texmf-context/tex/context/base/ as printed in the output.

i'll upload a version with a bit more checking Still not working here. Is there a way to downgrade my installation back to the last context beta without the mkii and mkiv subdirs in order to be able to use context again (and wait for a solution)?

you're the only one with this issue (or the only one who reports it) so i have no clue what to do does a fresh install work ? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

Le 16/01/2016, Hans Hagen a écrit
> On 1/16/2016 12:14 AM, Romain Diss wrote:
> >Hi all,
> >
> >
> >Le 13/01/2016, Hans Hagen a écrit
> >>On 1/13/2016 1:22 AM, Romain Diss wrote:
> >>>Le 13/01/2016, Hans Hagen a écrit
> >>>>On 1/13/2016 12:01 AM, Romain Diss wrote:
> >>>>>On 1/12/2016, Hans Hagen wrote:
> >>>>>>On 1/12/2016 9:33 PM, Romain Diss wrote:
> >>>>>>>I just downloaded the new beta and I can not launch context anymore. It
> >>>>>>>complains it can't find a 'luat-exe.lua' file:
> >>>>>>>>system          > lua > loading of file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed:
> >>>>>>>>         cannot open /opt/context/tex/texmf-context/tex/context/base/luat-exe.lua: No such file or directory
> >>>>>>>>resolvers       > lua > loading file '/opt/context/tex/texmf-context/tex/context/base/luat-exe.lua' failed
> >>>>>>>>error loading file: luat-exe.lua (aborting)
> >>>>
> >>>>is that file sompelace on the system?
> >>>Yes, it is located in /opt/context/tex/texmf-context/tex/context/base/mkiv/luat-exe.lua
> >>>
> >>>Concerning the 'context --version' error message, the 'context.mkiv' is
> >>>also located in /opt/context/tex/texmf-context/tex/context/base/mkiv/
> >>>and not in /opt/context/tex/texmf-context/tex/context/base/ as printed
> >>>in the output.
> >>
> >>i'll upload a version with a bit more checking
> >Still not working here. Is there a way to downgrade my installation back
> >to the last context beta without the mkii and mkiv subdirs in order to
> >be able to use context again (and wait for a solution)?
> 
> you're the only one with this issue (or the only one who reports it) so i
> have no clue what to do
> 
> does a fresh install work ?
After a lot of tests, I found the origin of the problem:
- I had a custom texmfcache dir set in my .bashrc file:
  > export TEXMFCACHE="${HOME}/.texmf-var"
- I certainly changed by mistake the acces rights of this texmfcache
  dir so it was write/read/execute protected.

So I change the acces rights of the dir and ran 'mtxrun --generate'
again and this solved everything. Maybe this can help to add checks for
this case.

Again thanks for your help.

PS: I agree with Thomas that the mkii and mkiv split is a really good
thing (however, I wonder why first-setup.sh installs the mkii dir when
called with --engine=luatex…)

All the best.


-- 
Romain Diss

On 1/16/2016 8:35 PM, Romain Diss wrote:

...

PS: I agree with Thomas that the mkii and mkiv split is a really good thing (however, I wonder why first-setup.sh installs the mkii dir when called with --engine=luatex…)

because it remembers that you have installed mkii before (there is a status file) That's not an important point but I tried an installation after removing

Hi, Le 16/01/2016, Hans Hagen a écrit this status file and I still get the mkii directory. I also tried to set engines.pdftex and engines.xetex to false in the status file but nothing changed. Another remark. Maybe it's a problem on my side but in all the tests I made to solve my problem, I noticed that context worked only if the mtxrun path where the first one in my PATH environment variable… All the best. -- Romain Diss

Hi, Le 17/01/2016, Hans Hagen a écrit

On 1/17/2016 12:18 AM, Romain Diss wrote:

...

Another remark. Maybe it's a problem on my side but in all the tests I made to solve my problem, I noticed that context worked only if the mtxrun path where the first one in my PATH environment variable…

you have to be more explicit $ #MWE (bash) $ export PATH=/opt/context/tex/texmf-linux-64/bin:/usr/local/bin:/usr/bin:/bin $ context test.tex $ # works fine $ export PATH=/usr/local/bin:/usr/bin:/bin:/opt/context/tex/texmf-linux-64/bin $ context test.tex

resolvers | trees | analyzing 'home:texmf'cannot open /usr/share/texmf/scripts/context/lua/mtx-context.lua: No such file or directory The previous line is the context output when I run context with the bin installation path (/opt/context/tex/texmf-linux-64/bin) in the last position in my environment PATH variable. All the best -- Romain Diss