Hello Hans, Taco, and the next gurus, sorry for bother with another thing I can not understand. Very high glyphs like \v S disturb grid in the \placelist. The same glyph in the common paragraph with the same (intentionally) interline setting preserves grid: --------------------------------------- \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt] \setuplayout[grid=yes,width=8cm] \showgrid \writetolist[section]{}{See the next line:} \writetolist[section]{}{\v Sejba} \writetolist[section]{}{Another list line} \starttext \v Sejba\par Here grid is OK, but in \type{placelist}: \placelist[section] no! \stoptext ------------------------------------------ I was looking in definitions for some font-size dependent line setting, I also tried to \setuplist[section]{style=\baselineskip=12pt\lineskiplimit=-10pt} but without success to lounging on the grid. Can somebody help me, please? vit
Vit Zyka wrote:
Hello Hans, Taco, and the next gurus,
sorry for bother with another thing I can not understand. Very high glyphs like \v S disturb grid in the \placelist. The same glyph in the common paragraph with the same (intentionally) interline setting preserves grid:
--------------------------------------- \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt] \setuplayout[grid=yes,width=8cm] \showgrid
\writetolist[section]{}{See the next line:} \writetolist[section]{}{\v Sejba} \writetolist[section]{}{Another list line}
\starttext \v Sejba\par Here grid is OK, but in \type{placelist}:
\placelist[section]
no! \stoptext ------------------------------------------ I was looking in definitions for some font-size dependent line setting, I also tried to \setuplist[section]{style=\baselineskip=12pt\lineskiplimit=-10pt} but without success to lounging on the grid.
this is the default ratio: \setupinterlinespace [height=.72, depth=.28] you can change that (as long as it adds up to 1.0) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Hans Hagen wrote:
Vit Zyka wrote:
Hello Hans, Taco, and the next gurus,
sorry for bother with another thing I can not understand. Very high glyphs like \v S disturb grid in the \placelist. The same glyph in the common paragraph with the same (intentionally) interline setting preserves grid:
--------------------------------------- \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt] \setuplayout[grid=yes,width=8cm] \showgrid
\writetolist[section]{}{See the next line:} \writetolist[section]{}{\v Sejba} \writetolist[section]{}{Another list line}
\starttext \v Sejba\par Here grid is OK, but in \type{placelist}:
\placelist[section]
no! \stoptext ------------------------------------------ I was looking in definitions for some font-size dependent line setting, I also tried to \setuplist[section]{style=\baselineskip=12pt\lineskiplimit=-10pt} but without success to lounging on the grid.
this is the default ratio:
\setupinterlinespace [height=.72, depth=.28]
Thank you Hans; after some experimenting I understood: - height and depth in \setupinterlinespace are baseline-ratio/size of struts (add description to tex-show) - some my chars (/,\v S, \tfa, ...) oversized \strut size of any ratio - list items are typeset with struts (perhaps all alternative) - only alternative without strut is 'none' with command=\Mycommand def So I do know how to preserve grid. But I do not know HOW TO TYPESET \Mycommand TO FIT THE PARAGRAPH WIDTH. It seem it is not in the restricted horizontal mode and continue on one long line. And another question/request: can the list distance param (alternative d,...) be glue instead of skip? For better line fitting. example: ------------------ \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt,height=.77,depth=.23] \setuplayout[grid=yes,width=8cm] \showgrid \setuplist[section] [style=\tfd,alternative=none,command=\MyListItem] \def\MyListItem#1#2#3{{\tfb (#1-#2-#3) }} \starttext \writetolist[section]{}{See the next line} \writetolist[section]{}{\v Sejba} \writetolist[section]{}{Another list line} \writetolist[section]{}{And the last one} \lineskiplimit=-10pt Line\par Anothet line of \v Sejba\par \placelist[section] \strut %% should be! why? After list line. \stoptext ------------------ Vit
Vit Zyka wrote:
Hans Hagen wrote:
Vit Zyka wrote:
Hello Hans, Taco, and the next gurus,
sorry for bother with another thing I can not understand. Very high glyphs like \v S disturb grid in the \placelist. The same glyph in the common paragraph with the same (intentionally) interline setting preserves grid:
--------------------------------------- \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt] \setuplayout[grid=yes,width=8cm] \showgrid
\writetolist[section]{}{See the next line:} \writetolist[section]{}{\v Sejba} \writetolist[section]{}{Another list line}
\starttext \v Sejba\par Here grid is OK, but in \type{placelist}:
\placelist[section]
no! \stoptext ------------------------------------------ I was looking in definitions for some font-size dependent line setting, I also tried to \setuplist[section]{style=\baselineskip=12pt\lineskiplimit=-10pt} but without success to lounging on the grid.
this is the default ratio:
\setupinterlinespace [height=.72, depth=.28]
Thank you Hans; after some experimenting I understood: - height and depth in \setupinterlinespace are baseline-ratio/size of struts (add description to tex-show) - some my chars (/,\v S, \tfa, ...) oversized \strut size of any ratio - list items are typeset with struts (perhaps all alternative) - only alternative without strut is 'none' with command=\Mycommand def
So I do know how to preserve grid. But I do not know HOW TO TYPESET \Mycommand TO FIT THE PARAGRAPH WIDTH. It seem it is not in the restricted horizontal mode and continue on one long line. And another question/request: can the list distance param (alternative d,...) be glue instead of skip? For better line fitting.
example: ------------------ \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt,height=.77,depth=.23] \setuplayout[grid=yes,width=8cm] \showgrid
\setuplist[section] [style=\tfd,alternative=none,command=\MyListItem] \def\MyListItem#1#2#3{{\tfb (#1-#2-#3) }}
\starttext \writetolist[section]{}{See the next line} \writetolist[section]{}{\v Sejba} \writetolist[section]{}{Another list line} \writetolist[section]{}{And the last one}
\lineskiplimit=-10pt Line\par Anothet line of \v Sejba\par
\placelist[section]
\strut %% should be! why? After list line.
\stoptext ------------------
Vit
\setuplist [section] [style=\tfd, alternative=none, after=\blank, before=\blank, command=\MyListItem] \setuplist [section] [style=\tfd, alternative=command command=\MyListItem] in core-lst you can see how the alternatives are defined ok, let's give you a bonus (goes in cont-new): \unprotect \def\definelistplacement {\dodoubleempty\dodefinelistplacement} \def\dodefinelistplacement[#1][#2]% {\setvalue{\@@dodolistelement#1}% {\doifelsenothing{#2} {\getvalue{\@@dodolistelement\v!command}}% {\executeifdefined{\@@dodolistelement#2} {\getvalue{\@@dodolistelement\v!command}}}% \setvalue{\??li\currentlist\c!command}% {\getvalue{\@@dodolistelement::#1}}}% \setvalue{\@@dodolistelement::#1}} \definelistplacement[MyListItem][none]#1#2#3% {\listparameter{style} (#1 - #2 - #3) } \protect now you can say: \definelistplacement[MyListItem][none]#1#2#3% {\listparameter{style} (#1 - #2 - #3) } \setuplist [section] [style=\tfd, alternative=MyListItem, after=\blank, before=\blank] (btw, watch how one can ask for listparameters) \definelistplacement[MyListItem][none]#1#2#3% {\listparameter{style} (#1 - #2 - #3) } \setuplist [section] [style=\tfd, alternative=MyListItem, after=\blank, before=\blank] \definelistplacement[MyListItem][none]#1#2#3% {\listparameter{before} \listparameter{style} (#1 - #2 - #3) \listparameter{after}} Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Hans Hagen wrote:
Vit Zyka wrote:
Hans Hagen wrote:
Vit Zyka wrote:
Hello Hans, Taco, and the next gurus,
sorry for bother with another thing I can not understand. Very high glyphs like \v S disturb grid in the \placelist. The same glyph in the common paragraph with the same (intentionally) interline setting preserves grid:
--------------------------------------- \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt] \setuplayout[grid=yes,width=8cm] \showgrid
\writetolist[section]{}{See the next line:} \writetolist[section]{}{\v Sejba} \writetolist[section]{}{Another list line}
\starttext \v Sejba\par Here grid is OK, but in \type{placelist}:
\placelist[section]
no! \stoptext ------------------------------------------ I was looking in definitions for some font-size dependent line setting, I also tried to \setuplist[section]{style=\baselineskip=12pt\lineskiplimit=-10pt} but without success to lounging on the grid.
this is the default ratio:
\setupinterlinespace [height=.72, depth=.28]
Thank you Hans; after some experimenting I understood: - height and depth in \setupinterlinespace are baseline-ratio/size of struts (add description to tex-show) - some my chars (/,\v S, \tfa, ...) oversized \strut size of any ratio - list items are typeset with struts (perhaps all alternative) - only alternative without strut is 'none' with command=\Mycommand def
So I do know how to preserve grid. But I do not know HOW TO TYPESET \Mycommand TO FIT THE PARAGRAPH WIDTH. It seem it is not in the restricted horizontal mode and continue on one long line. And another question/request: can the list distance param (alternative d,...) be glue instead of skip? For better line fitting.
example: ------------------ \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt,height=.77,depth=.23] \setuplayout[grid=yes,width=8cm] \showgrid
\setuplist[section] [style=\tfd,alternative=none,command=\MyListItem] \def\MyListItem#1#2#3{{\tfb (#1-#2-#3) }}
\starttext \writetolist[section]{}{See the next line} \writetolist[section]{}{\v Sejba} \writetolist[section]{}{Another list line} \writetolist[section]{}{And the last one}
\lineskiplimit=-10pt Line\par Anothet line of \v Sejba\par
\placelist[section]
\strut %% should be! why? After list line.
\stoptext ------------------
Vit
Hallo hans, thank you for your code. I find it in my mail box just today although it is 4 days old. So apologise me. Unfortunately it seems to me it A) does not work after successfull \definelistplacement[MyListItem][none]#1#2#3% {\listparameter{style} (#1 - #2 - #3) } \MyListItem is not defined. B) does not solve the problem with a single long line list alternative. But. Your example discovered me there are few more alternative in \setuplist (except a..f, none): horizontal vertical command So your example leads me to find the solution. I still do not know how to insert interaction to page number inside \MyListCommand. I have tried \def\MyListCommand#1#2#3{% #1-#2-% \setbox0\hbox{#3}% \showcontrastlocation\??ia{??}{#3}}% \linklisttoelement{subsection}{??}{#3}{\box0}% )} } but I am puzzled by \linklisttoelement parameters. Thnak ones more Vit Solution: ---------------------- \setupbodyfont[10pt,rm] \setupinterlinespace[line=12pt,height=.77,depth=.23] \setuplayout[grid=yes,width=8cm] \showgrid \setuplist[part] [style=\bfb,alternative=command,command=\MyListCommand,before=\blank,after=\endgraf] \setuplist[chapter] [style=\bfb,alternative=command,command=\MyListCommand,before=\blank,after=\endgraf] \setuplist[section] [style=\tfa,alternative=command,command=\MyListCommand] \def\MyListCommand#1#2#3{% \listparameter{before}% {\listparameter{style}(#1-#2-#3)}\hskip1em plus.5em minus.5em \listparameter{after}% } \starttext \writetolist[part]{1}{Part 1} \writetolist[chapter]{1}{Chapter 1} \writetolist[section]{1}{See the next line} \writetolist[section]{2}{\v Sejba} \writetolist[section]{3}{Another list line} \expanded{\writetolist[section]{}{And the last line.}} \writetolist[chapter]{2}{Chapter 2} \writetolist[section]{1}{Section 1} \lineskiplimit=-\maxdimen Line\par Another line of \v Sejba\par \placecontent \strut After list. \stoptext -------------------------------
\setuplist [section] [style=\tfd, alternative=none, after=\blank, before=\blank, command=\MyListItem]
\setuplist [section] [style=\tfd, alternative=command command=\MyListItem]
in core-lst you can see how the alternatives are defined ok, let's give you a bonus (goes in cont-new): \unprotect \def\definelistplacement {\dodoubleempty\dodefinelistplacement}
\def\dodefinelistplacement[#1][#2]% {\setvalue{\@@dodolistelement#1}% {\doifelsenothing{#2} {\getvalue{\@@dodolistelement\v!command}}% {\executeifdefined{\@@dodolistelement#2} {\getvalue{\@@dodolistelement\v!command}}}% \setvalue{\??li\currentlist\c!command}% {\getvalue{\@@dodolistelement::#1}}}% \setvalue{\@@dodolistelement::#1}}
\definelistplacement[MyListItem][none]#1#2#3% {\listparameter{style} (#1 - #2 - #3) }
\protect now you can say: \definelistplacement[MyListItem][none]#1#2#3% {\listparameter{style} (#1 - #2 - #3) }
\setuplist [section] [style=\tfd, alternative=MyListItem, after=\blank, before=\blank]
(btw, watch how one can ask for listparameters) \definelistplacement[MyListItem][none]#1#2#3% {\listparameter{style} (#1 - #2 - #3) }
\setuplist [section] [style=\tfd, alternative=MyListItem, after=\blank, before=\blank]
\definelistplacement[MyListItem][none]#1#2#3% {\listparameter{before} \listparameter{style} (#1 - #2 - #3) \listparameter{after}}
Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
_______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
-- ======================================================= Ing. Vít Zýka, Ph.D. TYPOkvítek database publishing databazove publikovani data maintaining and typesetting in typographic quality priprava dat a jejich sazba v typograficke kvalite tel.: (+420) 777 198 189 www: http://typokvitek.com =======================================================
participants (2)
-
Hans Hagen -
Vit Zyka