Hi, I am running ConTeXt mark IV. I need to use metauml for my work. However, I could not get it installed. Please help. The install file which comes with it does not work for context. -- Best regards, Shiv Shankar Dayal
On 14-5-2010 11:43, Shiv Shankar Dayal wrote:
I am running ConTeXt mark IV. I need to use metauml for my work. However, I could not get it installed. Please help. The install file which comes with it does not work for context.
more info needed .. test file and so Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Hi,
I am running ConTeXt mark IV. I need to use metauml for my work. However, I could not get it installed. Please help. The install file which comes with it does not work for context.
more info needed .. test file and so
Hans
Sorry about this. Following is from a file for which I took the code from mailing list itself. \chapter{Diameter Finite State Machine} The state machine of the diameter base protocol implementation will observer following state machine. \startMPinclusions input metauml; \stopMPinclusions \startuseMPgraphic{xx} save A; save B; Class.A("Point") ("+x: int", "+y: int") (); Class.B("Circle") ("radius: int") ("+getRadius(): int", "+setRadius(r: int):void"); topToBottom(45)(A, B); drawObjects(A, B); clink(aggregationUni)(A, B); \stopuseMPgraphic \placefigure[here][fig:xx]{xx}{\useMPgraphic{xx}} This is included in starttext block. For verbosity I am also giving you some errors. Isolated expression. <to be read again> ( <*> save A; save B; Class.A( "Point") ("+x: int", "+y: int") (); Class.B("Ci... ! Extra tokens will be flushed. <to be read again> ( <*> save A; save B; Class.A( "Point") ("+x: int", "+y: int") (); Class.B("Ci...
Class.B ! Isolated expression.
Best regards, Shiv Shankar Dayal
On Sat, May 15, 2010 at 12:04 AM, Shiv Shankar Dayal
Hi,
I am running ConTeXt mark IV. I need to use metauml for my work. However, I could not get it installed. Please help. The install file which comes with it does not work for context.
more info needed .. test file and so
Hans
Sorry about this. Following is from a file for which I took the code from mailing list itself.
\chapter{Diameter Finite State Machine} The state machine of the diameter base protocol implementation will observer following state machine. \startMPinclusions input metauml; \stopMPinclusions \startuseMPgraphic{xx}
save A; save B; Class.A("Point") ("+x: int", "+y: int") ();
Class.B("Circle") ("radius: int") ("+getRadius(): int", "+setRadius(r: int):void");
topToBottom(45)(A, B);
drawObjects(A, B);
clink(aggregationUni)(A, B);
\stopuseMPgraphic
\placefigure[here][fig:xx]{xx}{\useMPgraphic{xx}}
This is included in starttext block.
For verbosity I am also giving you some errors.
Isolated expression. <to be read again> ( <*> save A; save B; Class.A( "Point") ("+x: int", "+y: int") (); Class.B("Ci...
! Extra tokens will be flushed. <to be read again> ( <*> save A; save B; Class.A( "Point") ("+x: int", "+y: int") (); Class.B("Ci...
Class.B ! Isolated expression.
Best regards, Shiv Shankar Dayal ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
No problem here with mkii and texlive 2009 and export shell_escape=t; my test.tex is in the same folder of metauml %% %%test.tex \setupcolors[state=start] \startMPinclusions input metauml; \stopMPinclusions \starttext \chapter{Diameter Finite State Machine} The state machine of the diameter base protocol implementation will observer following state machine. \startuseMPgraphic{xx} save A; save B; Class.A("Point") ("+x: int", "+y: int") (); Class.B("Circle") ("radius: int") ("+getRadius(): int", "+setRadius(r: int):void"); topToBottom(45)(A, B); drawObjects(A, B); clink(aggregationUni)(A, B); \stopuseMPgraphic \placefigure[here][fig:xx]{xx}{\useMPgraphic{xx}} \stoptext -- luigi
(repost)
On Sat, May 15, 2010 at 12:04 AM, Shiv Shankar Dayal
Hi,
I am running ConTeXt mark IV. I need to use metauml for my work. However, I could not get it installed. Please help. The install file which comes with it does not work for context.
more info needed .. test file and so
Hans
Sorry about this. Following is from a file for which I took the code from mailing list itself.
\chapter{Diameter Finite State Machine} The state machine of the diameter base protocol implementation will observer following state machine. \startMPinclusions input metauml; \stopMPinclusions \startuseMPgraphic{xx}
save A; save B; Class.A("Point") ("+x: int", "+y: int") ();
Class.B("Circle") ("radius: int") ("+getRadius(): int", "+setRadius(r: int):void");
topToBottom(45)(A, B);
drawObjects(A, B);
clink(aggregationUni)(A, B);
\stopuseMPgraphic
\placefigure[here][fig:xx]{xx}{\useMPgraphic{xx}}
This is included in starttext block.
For verbosity I am also giving you some errors.
Isolated expression. <to be read again> ( <*> save A; save B; Class.A( "Point") ("+x: int", "+y: int") (); Class.B("Ci...
! Extra tokens will be flushed. <to be read again> ( <*> save A; save B; Class.A( "Point") ("+x: int", "+y: int") (); Class.B("Ci...
Class.B ! Isolated expression.
No problem here with mkii and texlive 2009 and export shell_escape=t; my test.tex is in the same folder of metauml %% %%test.tex \setupcolors[state=start] \startMPinclusions input metauml; \stopMPinclusions \starttext \chapter{Diameter Finite State Machine} The state machine of the diameter base protocol implementation will observer following state machine. \startuseMPgraphic{xx} save A; save B; Class.A("Point") ("+x: int", "+y: int") (); Class.B("Circle") ("radius: int") ("+getRadius(): int", "+setRadius(r: int):void"); topToBottom(45)(A, B); drawObjects(A, B); clink(aggregationUni)(A, B); \stopuseMPgraphic \placefigure[here][fig:xx]{xx}{\useMPgraphic{xx}} \stoptext -- luigi
Hi,
I am running ConTeXt mark IV. I need to use metauml for my work. However, I could not get it installed. Please help. The install file which comes with it does not work for context.
more info needed .. test file and so
Hans
Sorry about this. Following is from a file for which I took the code from mailing list itself.
Sorry to bother you people. It is a pain to waste time like this. Since metaobj works with context I will extend and use it to draw UML diagrams. I just thought that since it is mentioned as a package at contextgarden I was hoping that it will work out of the box. -- Best regards, Shiv Shankar Dayal
On 15-5-2010 5:08, Shiv Shankar Dayal wrote:
Hi,
I am running ConTeXt mark IV. I need to use metauml for my work. However, I could not get it installed. Please help. The install file which comes with it does not work for context.
more info needed .. test file and so
Hans
Sorry about this. Following is from a file for which I took the code from mailing list itself.
Sorry to bother you people. It is a pain to waste time like this. Since metaobj works with context I will extend and use it to draw UML diagrams. I just thought that since it is mentioned as a package at contextgarden I was hoping that it will work out of the box.
\startMPinclusions string metauml_defaultFont ; metauml_defaultFont := "\truefontname{Serif}" ; string metauml_defaultFontOblique ; metauml_defaultFontOblique := "\truefontname{SerifItalic}" ; string metauml_defaultFontBold ; metauml_defaultFontBold := "\truefontname{SerifBold}" ; string metauml_defaultFontBoldOblique ; metauml_defaultFontBoldOblique := "\truefontname{SerifBoldItalic}" ; input metauml; \stopMPinclusions At least prevents the error but alignment is weird. Some pseudo typesetting is going on and the quality is suboptimal then (after all mp just pastes glyphs then). Take this: Class.A ("Point") ("+x: int", "+y: int") (); It's probably no big deal for the author to support pictures instead of strings Class.A ("Point") (btex +x: int etex, "+y: int") (); Class.A ("Point") (textext("+x: int"), "+y: int") (); It's probabaly already possible somehow but i have no time to look into the code in detail now. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Hi all, Thanks a lot for this help. I tried again with modifications and it is working with wrong alignment. I am tried using simplefonts like \usemodule[simplefonts,vim,mathml] \setmainfont[LucidaStd] \setmonofont[CourierNew] If I add the above code then it overrides Hanss' suggestion but still the alignment is wrong. I am going to try more fonts to get the alignment right.
\startMPinclusions string metauml_defaultFont ; metauml_defaultFont := "\truefontname{Serif}" ; string metauml_defaultFontOblique ; metauml_defaultFontOblique := "\truefontname{SerifItalic}" ; string metauml_defaultFontBold ; metauml_defaultFontBold := "\truefontname{SerifBold}" ; string metauml_defaultFontBoldOblique ; metauml_defaultFontBoldOblique := "\truefontname{SerifBoldItalic}" ;
input metauml; \stopMPinclusions
At least prevents the error but alignment is weird. Some pseudo typesetting is going on and the quality is suboptimal then (after all mp just pastes glyphs then). Take this:
Class.A ("Point") ("+x: int", "+y: int") ();
It's probably no big deal for the author to support pictures instead of strings
Class.A ("Point") (btex +x: int etex, "+y: int") ();
Class.A ("Point") (textext("+x: int"), "+y: int") ();
It's probabaly already possible somehow but i have no time to look into the code in detail now.
Hans
----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
-- Best regards, Shiv Shankar Dayal
On 17-5-2010 8:49, Shiv Shankar Dayal wrote:
Hi all,
Thanks a lot for this help. I tried again with modifications and it is working with wrong alignment. I am tried using simplefonts like
also in the latest beta? ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Hi all,
I am also interested in using MetaUML with ConTeXt mkiv. I tried compiling
the attached test-metauml.tex with the versions (I updated today):
MTXrun | main context file:
/opt/context/beta/tex/texmf-context/tex/context/base/context.tex
MTXrun | current version: 2010.06.23 12:45
and
This is LuaTeX, Version beta-0.60.2-2010070309
I get the result in the attached test-metauml.pdf, still with the wrong
alignment.
I also tried building the MetaUML graphic in a separate test-metauml.mp file
using "mpost -mem=mpost.mem test-metauml.mp" (I changed the default font in
metauml_defaults.mp to cmtt12) and the left alignment was correct, but the
background boxes were no longer wide enough so that the text overran the box
background.
Kevin
On Mon, May 17, 2010 at 3:12 PM, Hans Hagen
On 17-5-2010 8:49, Shiv Shankar Dayal wrote:
Hi all,
Thanks a lot for this help. I tried again with modifications and it is working with wrong alignment. I am tried using simplefonts like
also in the latest beta?
----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net
___________________________________________________________________________________
Hi, The attached file runs without errors for me in mkiv (latest beta, 2010.05.14 15:26 MKIV). However, note the following: 1. I had to add loading of 8r-base.map for the rptmr font 2. The placement of the text strings is wrong (probably related) Best wishes, Taco Shiv Shankar Dayal wrote:
Hi,
I am running ConTeXt mark IV. I need to use metauml for my work. However, I could not get it installed. Please help. The install file which comes with it does not work for context. more info needed .. test file and so
Hans
Sorry about this. Following is from a file for which I took the code from mailing list itself.
\chapter{Diameter Finite State Machine} The state machine of the diameter base protocol implementation will observer following state machine. \startMPinclusions input metauml; \stopMPinclusions \startuseMPgraphic{xx}
save A; save B; Class.A("Point") ("+x: int", "+y: int") ();
Class.B("Circle") ("radius: int") ("+getRadius(): int", "+setRadius(r: int):void");
topToBottom(45)(A, B);
drawObjects(A, B);
clink(aggregationUni)(A, B);
\stopuseMPgraphic
\placefigure[here][fig:xx]{xx}{\useMPgraphic{xx}}
This is included in starttext block.
For verbosity I am also giving you some errors.
Isolated expression. <to be read again> ( <*> save A; save B; Class.A( "Point") ("+x: int", "+y: int") (); Class.B("Ci...
! Extra tokens will be flushed. <to be read again> ( <*> save A; save B; Class.A( "Point") ("+x: int", "+y: int") (); Class.B("Ci...
Class.B ! Isolated expression.
Best regards, Shiv Shankar Dayal ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
participants (5)
-
Hans Hagen -
Kevin D. Robbins -
luigi scarso -
Shiv Shankar Dayal -
Taco Hoekwater