Dear all, I have problems with the placement of floats. I need them to be placed in the outer edge of the text, but Context puts them in the middle of the page. The outer, inner, outeredge, inneredge, commands do not work. Right and left do work. Preferably the criterium option should also work, e.g. criterium=0.67. A minimal test file is attached. Try it out with a dummy, or with cow picture, or with any other picture of your liking. I updated my context installation today to a bèta version. The version is: 2013.08.30 02.05. All help is welcome! Many thanks in advance, Robert %%%%%%%%%%%%%%%%%% \setuppapersize[A4][A4] \setuppagenumbering[alternative=doublesided,location=footer] \definefloat[edgefigure][figure] \setupfloat [edgefigure] [leftmargindistance=-\outercombitotal, rightmargindistance=-\outercombitotal, default={outer,none,low,high}] \setupcaption[edgefigure][number=no] \useexternalfigure[cow][./cow.pdf] \starttext \startsection[title={insight},reference=insight] \placeedgefigure[][]{}{\framed[frame=off]{\externalfigure[cow][scale=150]}} When the first volume of Donald Knuth's The Art of Computer Programming was published in 1969, it was typeset using hot metal type set by a Monotype Corporation typecaster with a hot metal typesetting machine from the 19th century which produced a "good classic style" appreciated by Knuth. When the second edition of the second volume was published, in 1976, the whole book had to be typeset again because the Monotype technology had been largely replaced by photographic techniques, and the original fonts were no longer available.[4] When Knuth received the galley proofs of the new book on 30 March 1977, he found them awful.[5] Around that time, Knuth saw for the first time the output of a high-quality digital typesetting system, and became interested in digital typography. The disappointing galley proofs gave him the final motivation to solve the problem at hand once and for all by designing his own typesetting system. On 13 May 1977, he wrote a memo to himself describing the basic features of TeX.[6] \placeedgefigure[][]{}{\framed[frame=off]{\externalfigure[cow][scale=150]}} He planned to finish it on his sabbatical in 1978, but as it happened the language was not frozen until 1989, more than ten years later. Guy Steele happened to be at Stanford during the summer of 1978, when Knuth was developing his first version of TeX. When Steele returned to MIT that autumn, he rewrote TeX's I/O to run under the ITS operating system. The first version of TeX was written in the SAIL programming language to run on a PDP-10 under Stanford's WAITS operating system. For later versions of TeX, Knuth invented the concept of literate programming, a way of producing compilable source code and cross-linked documentation typeset in TeX from the same original file. The language used is called WEB and produces programs in DEC PDP-10 Pascal. \placeedgefigure[][]{}{\framed[frame=off]{\externalfigure[cow][scale=150]}} When the first volume of Donald Knuth's The Art of Computer Programming was published in 1969, it was typeset using hot metal type set by a Monotype Corporation typecaster with a hot metal typesetting machine from the 19th century which produced a "good classic style" appreciated by Knuth. When the second edition of the second volume was published, in 1976, the whole book had to be typeset again because the Monotype technology had been largely replaced by photographic techniques, and the original fonts were no longer available.[4] When Knuth received the galley proofs of the new book on 30 March 1977, he found them awful.[5] Around that time, Knuth saw for the first time the output of a high-quality digital typesetting system, and became interested in digital typography. The disappointing galley proofs gave him the final motivation to solve the problem at hand once and for all by designing his own typesetting system. On 13 May 1977, he wrote a memo to himself describing the basic features of TeX.[6] He planned to finish it on his sabbatical in 1978, but as it happened the language was not frozen until 1989, more than ten years later. Guy Steele happened to be at Stanford during the summer of 1978, when Knuth was developing his first version of TeX. When Steele returned to MIT that autumn, he rewrote TeX's I/O to run under the ITS operating system. The first version of TeX was written in the SAIL programming language to run on a PDP-10 under Stanford's WAITS operating system. For later versions of TeX, Knuth invented the concept of literate programming, a way of producing compilable source code and cross-linked documentation typeset in TeX from the same original file. The language used is called WEB and produces programs in DEC PDP-10 Pascal. \stopsection \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ______________________________________________________________________________________________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
On 2013–09–10 R. Ermers wrote:
I have problems with the placement of floats. I need them to be placed in the outer edge of the text, but Context puts them in the middle of the page. The outer, inner, outeredge, inneredge, commands do not work. Right and left do work.
You probably confused edge and margin. By default the edge has zero width and has to be enabled using \setuplayout.
Preferably the criterium option should also work
\setupexternalfigures [location=default] \setuppagenumbering [alternative=doublesided] \definefloat [marginfigure] [marginfigures] [figure] \setupfloat [marginfigure] [default=margin, criterium=\marginwidth] \setupcaption [marginfigure] [number=no] \showframe \starttext \dorecurse{9}{%% \input knuth \startplacemarginfigure \externalfigure [cow] [width=\recurselevel cm] \stopplacemarginfigure} \stoptext Marco
Hi Marco, Thank you very much indeed for your reply. This topic apparently does not interest many people. In your suggestion the figures are put in the outer margin in a vertical row below one another close to the top of the page, and not near the position in the text. I want them positioned close to the place in the text which should flow around them. I have seen examples of this made by Context. This can be obtained by specifying default=left, or default=right, only I need the figures to protrude into the (outer) margin. This for some reason does not work under mkiv. I still have some time, but my deadline is approaching. Thanks again! Kind regards, Robert Op 10 sep. 2013, om 09:59 heeft Marco Patzer het volgende geschreven:
On 2013–09–10 R. Ermers wrote:
I have problems with the placement of floats. I need them to be placed in the outer edge of the text, but Context puts them in the middle of the page. The outer, inner, outeredge, inneredge, commands do not work. Right and left do work.
You probably confused edge and margin. By default the edge has zero width and has to be enabled using \setuplayout.
Preferably the criterium option should also work
\setupexternalfigures [location=default]
\setuppagenumbering [alternative=doublesided]
\definefloat [marginfigure] [marginfigures] [figure]
\setupfloat [marginfigure] [default=margin, criterium=\marginwidth]
\setupcaption [marginfigure] [number=no]
\showframe \starttext \dorecurse{9}{%% \input knuth \startplacemarginfigure \externalfigure [cow] [width=\recurselevel cm] \stopplacemarginfigure} \stoptext
Marco ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
On 2013–09–10 R. Ermers wrote:
I want them positioned close to the place in the text which should flow around them. I have seen examples of this made by Context. This can be obtained by specifying default=left, or default=right, only I need the figures to protrude into the (outer) margin.
I misunderstood your requirements. That's not what my example was supposed to do.
This for some reason does not work under mkiv.
Confirmed. And I don't know if it has ever worked in MkIV. Marco
Maybe what I did helps: see "Figures III" on http://wiki.contextgarden.net/Biochemistry_textbook. Although I used mkII at the time. Cheers, Jörg R. Ermers writes:
Hi Marco,
Thank you very much indeed for your reply. This topic apparently does not interest many people.
In your suggestion the figures are put in the outer margin in a vertical row below one another close to the top of the page, and not near the position in the text.
I want them positioned close to the place in the text which should flow around them. I have seen examples of this made by Context. This can be obtained by specifying default=left, or default=right, only I need the figures to protrude into the (outer) margin. This for some reason does not work under mkiv.
I still have some time, but my deadline is approaching.
Thanks again!
Kind regards,
Robert
Op 10 sep. 2013, om 09:59 heeft Marco Patzer het volgende geschreven:
On 2013–09–10 R. Ermers wrote:
I have problems with the placement of floats. I need them to be placed in the outer edge of the text, but Context puts them in the middle of the page. The outer, inner, outeredge, inneredge, commands do not work. Right and left do work.
You probably confused edge and margin. By default the edge has zero width and has to be enabled using \setuplayout.
Preferably the criterium option should also work
\setupexternalfigures [location=default]
\setuppagenumbering [alternative=doublesided]
\definefloat [marginfigure] [marginfigures] [figure]
\setupfloat [marginfigure] [default=margin, criterium=\marginwidth]
\setupcaption [marginfigure] [number=no]
\showframe \starttext \dorecurse{9}{%% \input knuth \startplacemarginfigure \externalfigure [cow] [width=\recurselevel cm] \stopplacemarginfigure} \stoptext
Marco
Hi Jörg and Marco, Thanks for your replies. I have tried the chemistry textbook examples too, especially vignette seems to do what I want. I noticed you used mkii at the time, but I have mkiv now. Should I return to mkii if I want to obtain this? Regards, Robert Op 10 sep. 2013, om 15:18 heeft Jörg Hagmann het volgende geschreven:
Maybe what I did helps: see "Figures III" on http://wiki.contextgarden.net/Biochemistry_textbook. Although I used mkII at the time.
Cheers, Jörg
R. Ermers writes:
Hi Marco,
Thank you very much indeed for your reply. This topic apparently does not interest many people.
In your suggestion the figures are put in the outer margin in a vertical row below one another close to the top of the page, and not near the position in the text.
I want them positioned close to the place in the text which should flow around them. I have seen examples of this made by Context. This can be obtained by specifying default=left, or default=right, only I need the figures to protrude into the (outer) margin. This for some reason does not work under mkiv.
I still have some time, but my deadline is approaching.
Thanks again!
Kind regards,
Robert
Op 10 sep. 2013, om 09:59 heeft Marco Patzer het volgende geschreven:
On 2013–09–10 R. Ermers wrote:
I have problems with the placement of floats. I need them to be placed in the outer edge of the text, but Context puts them in the middle of the page. The outer, inner, outeredge, inneredge, commands do not work. Right and left do work.
You probably confused edge and margin. By default the edge has zero width and has to be enabled using \setuplayout.
Preferably the criterium option should also work
\setupexternalfigures [location=default]
\setuppagenumbering [alternative=doublesided]
\definefloat [marginfigure] [marginfigures] [figure]
\setupfloat [marginfigure] [default=margin, criterium=\marginwidth]
\setupcaption [marginfigure] [number=no]
\showframe \starttext \dorecurse{9}{%% \input knuth \startplacemarginfigure \externalfigure [cow] [width=\recurselevel cm] \stopplacemarginfigure} \stoptext
Marco
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
Hi, Does anyone know if positioning figures protruding into the outer margin can be done in mkiv? Regards, Robert
Hi Jörg and Marco,
Thanks for your replies.
I have tried the chemistry textbook examples too, especially vignette seems to do what I want. I noticed you used mkii at the time, but I have mkiv now. Should I return to mkii if I want to obtain this?
Regards,
Robert
Op 10 sep. 2013, om 15:18 heeft Jörg Hagmann het volgende geschreven:
Maybe what I did helps: see "Figures III" on http://wiki.contextgarden.net/Biochemistry_textbook. Although I used mkII at the time.
Cheers, Jörg
R. Ermers writes:
Hi Marco,
Thank you very much indeed for your reply. This topic apparently does not interest many people.
In your suggestion the figures are put in the outer margin in a vertical row below one another close to the top of the page, and not near the position in the text.
I want them positioned close to the place in the text which should flow around them. I have seen examples of this made by Context. This can be obtained by specifying default=left, or default=right, only I need the figures to protrude into the (outer) margin. This for some reason does not work under mkiv.
I still have some time, but my deadline is approaching.
Thanks again!
Kind regards,
Robert
Op 10 sep. 2013, om 09:59 heeft Marco Patzer het volgende geschreven:
On 2013–09–10 R. Ermers wrote:
I have problems with the placement of floats. I need them to be placed in the outer edge of the text, but Context puts them in the middle of the page. The outer, inner, outeredge, inneredge, commands do not work. Right and left do work.
You probably confused edge and margin. By default the edge has zero width and has to be enabled using \setuplayout.
Preferably the criterium option should also work
\setupexternalfigures [location=default]
\setuppagenumbering [alternative=doublesided]
\definefloat [marginfigure] [marginfigures] [figure]
\setupfloat [marginfigure] [default=margin, criterium=\marginwidth]
\setupcaption [marginfigure] [number=no]
\showframe \starttext \dorecurse{9}{%% \input knuth \startplacemarginfigure \externalfigure [cow] [width=\recurselevel cm] \stopplacemarginfigure} \stoptext
Marco
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
Hi Contexters, Does anyone know whether it is possible in mkiv to position figures protruding in the outer margin? In mkii it used to work. It seems to me that this simple feature does not work in mkiv. See minimal example below. Is this a bug? Regards, Robert Op 10 sep. 2013, om 22:05 heeft R. Ermers het volgende geschreven:
Hi,
Does anyone know if positioning figures protruding into the outer margin can be done in mkiv?
Regards,
Robert
Hi Jörg and Marco,
Thanks for your replies.
I have tried the chemistry textbook examples too, especially vignette seems to do what I want. I noticed you used mkii at the time, but I have mkiv now. Should I return to mkii if I want to obtain this?
Regards,
Robert
Op 10 sep. 2013, om 15:18 heeft Jörg Hagmann het volgende geschreven:
Maybe what I did helps: see "Figures III" on http://wiki.contextgarden.net/Biochemistry_textbook. Although I used mkII at the time.
Cheers, Jörg
R. Ermers writes:
Hi Marco,
Thank you very much indeed for your reply. This topic apparently does not interest many people.
In your suggestion the figures are put in the outer margin in a vertical row below one another close to the top of the page, and not near the position in the text.
I want them positioned close to the place in the text which should flow around them. I have seen examples of this made by Context. This can be obtained by specifying default=left, or default=right, only I need the figures to protrude into the (outer) margin. This for some reason does not work under mkiv.
I still have some time, but my deadline is approaching.
Thanks again!
Kind regards,
Robert
Op 10 sep. 2013, om 09:59 heeft Marco Patzer het volgende geschreven:
On 2013–09–10 R. Ermers wrote:
I have problems with the placement of floats. I need them to be placed in the outer edge of the text, but Context puts them in the middle of the page. The outer, inner, outeredge, inneredge, commands do not work. Right and left do work.
You probably confused edge and margin. By default the edge has zero width and has to be enabled using \setuplayout.
Preferably the criterium option should also work
\setupexternalfigures [location=default]
\setuppagenumbering [alternative=doublesided]
\definefloat [marginfigure] [marginfigures] [figure]
\setupfloat [marginfigure] [default=margin, criterium=\marginwidth]
\setupcaption [marginfigure] [number=no]
\showframe \starttext \dorecurse{9}{%% \input knuth \startplacemarginfigure \externalfigure [cow] [width=\recurselevel cm] \stopplacemarginfigure} \stoptext
Marco
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
Hi Robert,
As far as I know this is not (yet) possible in MkIV. Depends on Hans
if he adds it. See the conversation "Placefigure inner/outer" from
August. (http://thread.gmane.org/gmane.comp.tex.context/83680/focus=83684)
@Hans/Wolfgang: any idea it will be added in the (near) future?
Cheers,
Tim
2013/9/14 R. Ermers
Hi Contexters,
Does anyone know whether it is possible in mkiv to position figures protruding in the outer margin? In mkii it used to work.
It seems to me that this simple feature does not work in mkiv. See minimal example below. Is this a bug?
Regards,
Robert
Op 10 sep. 2013, om 22:05 heeft R. Ermers het volgende geschreven:
Hi,
Does anyone know if positioning figures protruding into the outer margin can be done in mkiv?
Regards,
Robert
Hi Jörg and Marco,
Thanks for your replies.
I have tried the chemistry textbook examples too, especially vignette seems to do what I want. I noticed you used mkii at the time, but I have mkiv now. Should I return to mkii if I want to obtain this?
Regards,
Robert
Op 10 sep. 2013, om 15:18 heeft Jörg Hagmann het volgende geschreven:
Maybe what I did helps: see "Figures III" on http://wiki.contextgarden.net/Biochemistry_textbook. Although I used mkII at the time.
Cheers, Jörg
R. Ermers writes:
Hi Marco,
Thank you very much indeed for your reply. This topic apparently does not interest many people.
In your suggestion the figures are put in the outer margin in a vertical row below one another close to the top of the page, and not near the position in the text.
I want them positioned close to the place in the text which should flow around them. I have seen examples of this made by Context. This can be obtained by specifying default=left, or default=right, only I need the figures to protrude into the (outer) margin. This for some reason does not work under mkiv.
I still have some time, but my deadline is approaching.
Thanks again!
Kind regards,
Robert
Op 10 sep. 2013, om 09:59 heeft Marco Patzer het volgende geschreven:
On 2013–09–10 R. Ermers wrote:
> I have problems with the placement of floats. I need them to be > placed in the outer edge of the text, but Context puts them in the > middle of the page. The outer, inner, outeredge, inneredge, > commands do not work. Right and left do work.
You probably confused edge and margin. By default the edge has zero width and has to be enabled using \setuplayout.
> Preferably the criterium option should also work
\setupexternalfigures [location=default]
\setuppagenumbering [alternative=doublesided]
\definefloat [marginfigure] [marginfigures] [figure]
\setupfloat [marginfigure] [default=margin, criterium=\marginwidth]
\setupcaption [marginfigure] [number=no]
\showframe \starttext \dorecurse{9}{%% \input knuth \startplacemarginfigure \externalfigure [cow] [width=\recurselevel cm] \stopplacemarginfigure} \stoptext
Marco
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
On 9/14/2013 7:25 AM, R. Ermers wrote:
Hi Contexters,
Does anyone know whether it is possible in mkiv to position figures protruding in the outer margin? In mkii it used to work
there is a check missing .. fixed in next beta ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Okee, Thanks! Robert Op 17 sep. 2013, om 17:28 heeft Hans Hagen het volgende geschreven:
On 9/14/2013 7:25 AM, R. Ermers wrote:
Hi Contexters,
Does anyone know whether it is possible in mkiv to position figures protruding in the outer margin? In mkii it used to work
there is a check missing .. fixed in next beta
----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------
Thanks Hans! Cheers, Tim On 17 september 2013 at 17:29:31, Hans Hagen (pragma@wxs.nl) wrote: On 9/14/2013 7:25 AM, R. Ermers wrote:
Hi Contexters,
Does anyone know whether it is possible in mkiv to position figures protruding in the outer margin? In mkii it used to work
there is a check missing .. fixed in next beta ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
On Tue, 17 Sep 2013 17:28:45 +0200
Hans Hagen
On 9/14/2013 7:25 AM, R. Ermers wrote:
Hi Contexters,
Does anyone know whether it is possible in mkiv to position figures protruding in the outer margin? In mkii it used to work
there is a check missing .. fixed in next beta
How about asymmetric margins, such as .75 inch on the inner edge and .50 inch on the outer edge. How does MKIV handle this? -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html
Hi Hans, Is it possible to fix the "inouter" and "ininner" directives too? "inright" and "inleft" work as expected. Cheers, Tim On 18 september 2013 at 10:51:29, Tim Steenvoorden (tim.steenvoorden@gmail.com) wrote: Thanks Hans! Cheers, Tim On 17 september 2013 at 17:29:31, Hans Hagen (pragma@wxs.nl) wrote: On 9/14/2013 7:25 AM, R. Ermers wrote:
Hi Contexters,
Does anyone know whether it is possible in mkiv to position figures protruding in the outer margin? In mkii it used to work
there is a check missing .. fixed in next beta ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
participants (6)
-
Hans Hagen
-
john Culleton
-
Jörg Hagmann
-
Marco Patzer
-
R. Ermers
-
Tim Steenvoorden