TikZ module not found (TeX Live problem?)
Good day, I'm very new to ConTeXt, so maybe this is a fairly simple question. I want to use TikZ in the document. The specific part of the document is: ---- snip ---- \usemodule[tikz] \usetikzlibrary[positioning] ---- /snip ----- The problem seems to be that ConTeXt does not find the TikZ module. I use mkiv. The relevant output: ---- snip ----- % context test-document.tex mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test-document" --lua="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test-document.tex" --c:input="./test-document.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test-document', input './test-document', result 'test-document' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/grisu/test-document/test-document.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported resolvers > modules > 'tikz' is not found tex error > tex error on line 6 in file /home/gerion/sourcecode/test-document/test-document.tex: ! Undefined control sequence <recently read> \usetikzlibrary l.6 \usetikzlibrary [positioning] 1 \mainlanguage[de] 2 3 \setupcolors[state=start] 4 5 \usemodule[tikz] 6 >> \usetikzlibrary[positioning] 7 ----- /snip ----- Using TikZ within LaTeX is no problem in this distribution. Is this a problem of TeX Live (or the distribution packaging)? I've looked in the installed files of texlive-context and other modules are installed, even modules that require TikZ (eg. gantt). Thanks in advance, Gerion
On Mon, 2017-06-19 at 02:34 +0200, Gerion Entrup wrote:
Good day,
I'm very new to ConTeXt, so maybe this is a fairly simple question.
I want to use TikZ in the document. The specific part of the document is: ---- snip ---- \usemodule[tikz] \usetikzlibrary[positioning] ---- /snip -----
The problem seems to be that ConTeXt does not find the TikZ module. I use mkiv. The relevant output: ---- snip ----- % context test-document.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test-document" --lua="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test-document.tex" --c:input="./test-document.tex" -- c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english
system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test-document', input './test-document', result 'test-document' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/grisu/test-document/test-document.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported resolvers > modules > 'tikz' is not found
tex error > tex error on line 6 in file /home/gerion/sourcecode/test-document/test- document.tex: ! Undefined control sequence
<recently read> \usetikzlibrary l.6 \usetikzlibrary [positioning]
1 \mainlanguage[de] 2 3 \setupcolors[state=start] 4 5 \usemodule[tikz] 6 >> \usetikzlibrary[positioning] 7 ----- /snip -----
Using TikZ within LaTeX is no problem in this distribution. Is this a problem of TeX Live (or the distribution packaging)? I've looked in the installed files of texlive-context and other modules are installed, even modules that require TikZ (eg. gantt).
With TL 2017 the following example works as without problems. Post a minimal example to reproduce your problem, otherwise we can't help you. Also, your problem suggests a faulty TL installation. \usemodule[tikz] \usetikzlibrary[positioning] \starttext \tikz\node{Hello World!}; \stoptext
Thanks in advance, Gerion ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________
Am Dienstag, 20. Juni 2017, 11:45:19 CEST schrieb Henri Menke:
On Mon, 2017-06-19 at 02:34 +0200, Gerion Entrup wrote:
Good day,
I'm very new to ConTeXt, so maybe this is a fairly simple question.
I want to use TikZ in the document. The specific part of the document is: ---- snip ---- \usemodule[tikz] \usetikzlibrary[positioning] ---- /snip -----
The problem seems to be that ConTeXt does not find the TikZ module. I use mkiv. The relevant output: ---- snip ----- % context test-document.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test-document" --lua="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test-document.tex" --c:input="./test-document.tex" -- c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english
system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test-document', input './test-document', result 'test-document' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/grisu/test-document/test-document.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported resolvers > modules > 'tikz' is not found
tex error > tex error on line 6 in file /home/gerion/sourcecode/test-document/test- document.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.6 \usetikzlibrary [positioning]
1 \mainlanguage[de] 2 3 \setupcolors[state=start] 4 5 \usemodule[tikz] 6 >> \usetikzlibrary[positioning] 7 ----- /snip -----
Using TikZ within LaTeX is no problem in this distribution. Is this a problem of TeX Live (or the distribution packaging)? I've looked in the installed files of texlive-context and other modules are installed, even modules that require TikZ (eg. gantt).
With TL 2017 the following example works as without problems. Post a minimal example to reproduce your problem, otherwise we can't help you. Also, your problem suggests a faulty TL installation.
\usemodule[tikz] \usetikzlibrary[positioning]
\starttext
\tikz\node{Hello World!};
\stoptext Thanks so far. This exact example leads to the same error: ------- snip ------ % context test.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test" --lua="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/context-test/test.tex resolvers > modules > 'tikz' is not found tex error > tex error on line 2 in file /home/gerion/sourcecode/context-test/test.tex: ! Undefined control sequence <recently read> \usetikzlibrary l.2 \usetikzlibrary [positioning] 1 \usemodule[tikz] 2 >> \usetikzlibrary[positioning] 3 4 \starttext 5 6 \tikz\node{Hello World!}; 7 8 \stoptext 9 ------------ /snip -------- I ran "mtxrun --generate" before using context. Is there anything else I can do (run another command etc.)? Otherwise I'll file a bug in my distribution (I use Gentoo). Do you know a way to quickfix it? Gerion
Am Dienstag, 20. Juni 2017, 13:25:42 CEST schrieb Gerion Entrup:
Am Dienstag, 20. Juni 2017, 11:45:19 CEST schrieb Henri Menke:
On Mon, 2017-06-19 at 02:34 +0200, Gerion Entrup wrote:
Good day,
I'm very new to ConTeXt, so maybe this is a fairly simple question.
I want to use TikZ in the document. The specific part of the document is: ---- snip ---- \usemodule[tikz] \usetikzlibrary[positioning] ---- /snip -----
The problem seems to be that ConTeXt does not find the TikZ module. I use mkiv. The relevant output: ---- snip ----- % context test-document.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test-document" --lua="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test-document.tex" --c:input="./test-document.tex" -- c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english
system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test-document', input './test-document', result 'test-document' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/grisu/test-document/test-document.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported resolvers > modules > 'tikz' is not found
tex error > tex error on line 6 in file /home/gerion/sourcecode/test-document/test- document.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.6 \usetikzlibrary [positioning]
1 \mainlanguage[de] 2 3 \setupcolors[state=start] 4 5 \usemodule[tikz] 6 >> \usetikzlibrary[positioning] 7 ----- /snip -----
Using TikZ within LaTeX is no problem in this distribution. Is this a problem of TeX Live (or the distribution packaging)? I've looked in the installed files of texlive-context and other modules are installed, even modules that require TikZ (eg. gantt).
With TL 2017 the following example works as without problems. Post a minimal example to reproduce your problem, otherwise we can't help you. Also, your problem suggests a faulty TL installation.
\usemodule[tikz] \usetikzlibrary[positioning]
\starttext
\tikz\node{Hello World!};
\stoptext Thanks so far. This exact example leads to the same error: ------- snip ------ % context test.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test" --lua="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english
system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/context-test/test.tex resolvers > modules > 'tikz' is not found
tex error > tex error on line 2 in file /home/gerion/sourcecode/context-test/test.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.2 \usetikzlibrary [positioning]
1 \usemodule[tikz] 2 >> \usetikzlibrary[positioning] 3 4 \starttext 5 6 \tikz\node{Hello World!}; 7 8 \stoptext 9 ------------ /snip --------
I ran "mtxrun --generate" before using context. Is there anything else I can do (run another command etc.)? Otherwise I'll file a bug in my distribution (I use Gentoo). Do you know a way to quickfix it?
Update: The entire pgf folder in the third party module folder is missing in my distribution package. Copying the folder from a fresh Texlive installation does not work. I've filed a bug in my distribution. The problem seems to be there. Gerion
On 6/20/2017 4:15 PM, Gerion Entrup wrote:
Am Dienstag, 20. Juni 2017, 13:25:42 CEST schrieb Gerion Entrup:
Am Dienstag, 20. Juni 2017, 11:45:19 CEST schrieb Henri Menke:
On Mon, 2017-06-19 at 02:34 +0200, Gerion Entrup wrote:
Good day,
I'm very new to ConTeXt, so maybe this is a fairly simple question.
I want to use TikZ in the document. The specific part of the document is: ---- snip ---- \usemodule[tikz] \usetikzlibrary[positioning] ---- /snip -----
The problem seems to be that ConTeXt does not find the TikZ module. I use mkiv. The relevant output: ---- snip ----- % context test-document.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test-document" --lua="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test-document.tex" --c:input="./test-document.tex" -- c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english
system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test-document', input './test-document', result 'test-document' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/grisu/test-document/test-document.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported resolvers > modules > 'tikz' is not found
tex error > tex error on line 6 in file /home/gerion/sourcecode/test-document/test- document.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.6 \usetikzlibrary [positioning]
1 \mainlanguage[de] 2 3 \setupcolors[state=start] 4 5 \usemodule[tikz] 6 >> \usetikzlibrary[positioning] 7 ----- /snip -----
Using TikZ within LaTeX is no problem in this distribution. Is this a problem of TeX Live (or the distribution packaging)? I've looked in the installed files of texlive-context and other modules are installed, even modules that require TikZ (eg. gantt).
With TL 2017 the following example works as without problems. Post a minimal example to reproduce your problem, otherwise we can't help you. Also, your problem suggests a faulty TL installation.
\usemodule[tikz] \usetikzlibrary[positioning]
\starttext
\tikz\node{Hello World!};
\stoptext Thanks so far. This exact example leads to the same error: ------- snip ------ % context test.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test" --lua="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english
system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/context-test/test.tex resolvers > modules > 'tikz' is not found
tex error > tex error on line 2 in file /home/gerion/sourcecode/context-test/test.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.2 \usetikzlibrary [positioning]
1 \usemodule[tikz] 2 >> \usetikzlibrary[positioning] 3 4 \starttext 5 6 \tikz\node{Hello World!}; 7 8 \stoptext 9 ------------ /snip --------
I ran "mtxrun --generate" before using context. Is there anything else I can do (run another command etc.)? Otherwise I'll file a bug in my distribution (I use Gentoo). Do you know a way to quickfix it?
Update: The entire pgf folder in the third party module folder is missing in my distribution package. Copying the folder from a fresh Texlive installation does not work. I've filed a bug in my distribution. The problem seems to be there. you probably need to install context from the garden with
--modules=all Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------
Am Dienstag, 20. Juni 2017, 16:15:59 CEST schrieb Gerion Entrup:
Am Dienstag, 20. Juni 2017, 13:25:42 CEST schrieb Gerion Entrup:
Am Dienstag, 20. Juni 2017, 11:45:19 CEST schrieb Henri Menke:
On Mon, 2017-06-19 at 02:34 +0200, Gerion Entrup wrote:
Good day,
I'm very new to ConTeXt, so maybe this is a fairly simple question.
I want to use TikZ in the document. The specific part of the document is: ---- snip ---- \usemodule[tikz] \usetikzlibrary[positioning] ---- /snip -----
The problem seems to be that ConTeXt does not find the TikZ module. I use mkiv. The relevant output: ---- snip ----- % context test-document.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test-document" --lua="/home/gerion/.texlive/texmf-var/luatex- cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test-document.tex" --c:input="./test-document.tex" -- c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english
system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test-document', input './test-document', result 'test-document' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/grisu/test-document/test-document.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported resolvers > modules > 'tikz' is not found
tex error > tex error on line 6 in file /home/gerion/sourcecode/test-document/test- document.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.6 \usetikzlibrary [positioning]
1 \mainlanguage[de] 2 3 \setupcolors[state=start] 4 5 \usemodule[tikz] 6 >> \usetikzlibrary[positioning] 7 ----- /snip -----
Using TikZ within LaTeX is no problem in this distribution. Is this a problem of TeX Live (or the distribution packaging)? I've looked in the installed files of texlive-context and other modules are installed, even modules that require TikZ (eg. gantt).
With TL 2017 the following example works as without problems. Post a minimal example to reproduce your problem, otherwise we can't help you. Also, your problem suggests a faulty TL installation.
\usemodule[tikz] \usetikzlibrary[positioning]
\starttext
\tikz\node{Hello World!};
\stoptext Thanks so far. This exact example leads to the same error: ------- snip ------ % context test.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en" --jobname="test" --lua="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.0.4 (TeX Live 2017) system commands enabled. open source > 1 > 1 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int: english/english
system > 'cont-new.mkiv' loaded open source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv close source > 2 > 2 > /usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /home/gerion/sourcecode/context-test/test.tex resolvers > modules > 'tikz' is not found
tex error > tex error on line 2 in file /home/gerion/sourcecode/context-test/test.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.2 \usetikzlibrary [positioning]
1 \usemodule[tikz] 2 >> \usetikzlibrary[positioning] 3 4 \starttext 5 6 \tikz\node{Hello World!}; 7 8 \stoptext 9 ------------ /snip --------
I ran "mtxrun --generate" before using context. Is there anything else I can do (run another command etc.)? Otherwise I'll file a bug in my distribution (I use Gentoo). Do you know a way to quickfix it?
Update: The entire pgf folder in the third party module folder is missing in my distribution package. Copying the folder from a fresh Texlive installation does not work. I've filed a bug in my distribution. The problem seems to be there. The bug was fixed. It works now. Thank you anyway.
Gerion
participants (3)
-
Gerion Entrup -
Hans Hagen -
Henri Menke