Almost for sure (99.9%) I have made some deeeep mess with last context distro. Now, I would like to discover where I have corrupted my installation. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \setupcolors[state=start] \starttext %%\global\runMPgraphicstrue \startuseMPgraphic{hans} width :=\the\textwidth/5; height := width/4; fill fullcircle xscaled width yscaled height withcolor red; %withcolor (\RedGreenBlue); \stopuseMPgraphic \framed{\useMPgraphic{hans}} \stoptext %% NO texmfstart texutil --purgeall; texexec --pdf b %% NO texmfstart texutil --purgeall; texmfstart texexec --pdf b %% YES texmfstart texutil --purgeall; texexec --pdf --automprun b %% NO texmfstart texutil --purgeall; texmfstart texexec --pdf --automprun b Open to any suggestion. luigi
luigi scarso wrote:
Almost for sure (99.9%) I have made some deeeep mess with last context distro. Now, I would like to discover where I have corrupted my installation. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \setupcolors[state=start] \starttext %%\global\runMPgraphicstrue \startuseMPgraphic{hans} width :=\the\textwidth/5; height := width/4; fill fullcircle xscaled width yscaled height withcolor red; %withcolor (\RedGreenBlue); \stopuseMPgraphic \framed{\useMPgraphic{hans}} \stoptext (1) %% NO texmfstart texutil --purgeall; texexec --pdf b (2) %% NO texmfstart texutil --purgeall; texmfstart texexec --pdf b (3) %% YES texmfstart texutil --purgeall; texexec --pdf --automprun b (4) %% NO texmfstart texutil --purgeall; texmfstart texexec --pdf --automprun b Open to any suggestion.
If (1) doesn't work, but (3) does, you haven't set \runMPgraphicstrue inside \user\cont-sys.tex. Sorry, no more clues from my side. A full log of (4) would be helpful. Peter
luigi _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
On 1/12/07, Peter Rolf
luigi scarso wrote:
Almost for sure (99.9%) I have made some deeeep mess with last context distro. Now, I would like to discover where I have corrupted my installation. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \setupcolors[state=start] \starttext %%\global\runMPgraphicstrue \startuseMPgraphic{hans} width :=\the\textwidth/5; height := width/4; fill fullcircle xscaled width yscaled height withcolor red; %withcolor (\RedGreenBlue); \stopuseMPgraphic \framed{\useMPgraphic{hans}} \stoptext (1) %% NO texmfstart texutil --purgeall; texexec --pdf b (2) %% NO texmfstart texutil --purgeall; texmfstart texexec --pdf b (3) %% YES texmfstart texutil --purgeall; texexec --pdf --automprun b (4)
Open to any suggestion.
If (1) doesn't work, but (3) does, you haven't set \runMPgraphicstrue inside \user\cont-sys.tex. done Sorry, no more clues from my side. A full log of (4) would be helpful. here is $> texmfstart texutil --purgeall; texmfstart texexec --pdf --automprun b
This is pdfTeXk, Version 3.141592-1.40.1 (Web2C 7.5.6) (format=cont-en 2007.1.11) 12 JAN 2007 14:55 entering extended mode \write18 enabled. %&-line parsing enabled. (/opt/texlive/2005-test/texmf/web2c/natural.tcx) **b.tex emergencyend (./b.tex ConTeXt ver: 2007.01.02 13:44 MK II fmt: 2007.1.11 int: english/english language : language en is active system : cont-new loaded (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex \boislevel=\count210 (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-new.mkii)) system : cont-old loaded (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-sys.tex (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-exa.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-syn.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-enc.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-siz.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-map.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-spe.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded language : patterns en->ec:ec->1->2:3 uk->ec:ec->2->2:3 de->texnansi:tex nansi->3->2:3 de->ec:ec->4->2:3 fr->texnansi:texnansi->5->2:3 fr->ec:ec->6->2:3 es->ec:ec->7->2:3 pt->texnansi:texnansi->8->2:3 pt->ec:ec->9->2:3 it->texnansi :texnansi->10->2:3 it->ec:ec->11->2:3 nl->texnansi:texnansi->12->2:3 nl->ec:ec-
13->2:3 cz->il2:il2->14->2:3 cz->ec:ec->15->2:3 sk->il2:il2->16->2:3 sk->ec:ec ->17->2:3 pl->pl0:pl0->18->2:3 pl->ec:ec->19->2:3 pl->qx:qx->20->2:3 loaded specials : tex,postscript,rokicki loaded \openout3 = `b.tui'.
system : b.top loaded (./b.top specials : loading definition file tpd (/opt/texlive/2005-test/texmf-dist/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/opt/texlive/2005-test/texmf-dist/tex/context/base/spec-fdf.tex \everygoto=\toks329 \PDFsymbolbox=\box157 \everyPDFxform=\toks330 (/opt/texlive/2005-test/texmf-dist/tex/context/base/spec-fdf.mkii)) specials : fdf loaded \everyPDFximage=\toks331 \PDFcurrenttransparency=\count211 ) specials : fdf,tpd loaded ) \openout0 = `b-mpgraph.mp'. \openout0 = `mpgraph.mp'. systems : system commands are enabled color : mpcmyk color space is supported color : mpspot color space is supported color : system rgb is global activated (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (/opt/texlive/2005-test/texmf-dist/tex/context/base/sort-def.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/sort-lan.tex) (./b.tuo) (./b.tuo) (/opt/texlive/2005-test/texmf-dist/tex/context/base/pdfr-def.tex) systems : begin file b at line 2 \@MPG@@MPG@b-mpgraph=\write7 \openout7 = `b-mpgraph.mp'. \openout6 = `b-mpgraph.mpb'. [MP b-mpgraph.1] fonts : resetting map file list {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-empty.map} fonts : using map file: texnansi-public-lm {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/texnansi-public-lm. map} fonts : using map file: original-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-base.map} fonts : using map file: ec-public-lm {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/ec-public-lm.map} fonts : using map file: ec-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/ec-base.map} fonts : using map file: lm-ec {/opt/texlive/2005-test/texmf-dist/fonts/map/dvips/lm/lm-ec.map} fonts : using map file: 8r-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/8r-base.map} fonts : using map file: t5-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/t5-base.map} fonts : using map file: original-ams-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-ams-base.m ap} fonts : using map file: original-ams-euler {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-ams-euler. map} fonts : using map file: original-public-lm {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-public-lm. map} [1.1] systems : end file b at line 16 [flush and process b-mpgraph.mp afterwards] ) Here is how much of TeX's memory you used: 1192 strings out of 57297 19676 string characters out of 535637 4605078 words of memory out of 5532220 41056 multiletter control sequences out of 10000+50000 75018 words of font info for 37 fonts, out of 1000000 for 2000 192 hyphenation exceptions out of 8191 47i,18n,51p,255b,471s stack positions out of 5000i,500n,6000p,200000b,5000s {/opt/texlive/2005-test/texmf-dist /fonts/enc/dvips/lm/lm-ec.enc} Output written on b.pdf (1 page, 13516 bytes). PDF statistics: 14 PDF objects out of 1000 (max. 8388607) 9 compressed objects within 1 object stream 0 named destinations out of 1000 (max. 131072) 1 words of extra memory for PDF output out of 10000 (max. 10000000) luigi
luigi scarso wrote:
On 1/12/07, Peter Rolf
wrote: luigi scarso wrote:
Almost for sure (99.9%) I have made some deeeep mess with last context distro. Now, I would like to discover where I have corrupted my installation. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \setupcolors[state=start] \starttext %%\global\runMPgraphicstrue \startuseMPgraphic{hans} width :=\the\textwidth/5; height := width/4; fill fullcircle xscaled width yscaled height withcolor red; %withcolor (\RedGreenBlue); \stopuseMPgraphic \framed{\useMPgraphic{hans}} \stoptext (1) %% NO texmfstart texutil --purgeall; texexec --pdf b (2) %% NO texmfstart texutil --purgeall; texmfstart texexec --pdf b (3) %% YES texmfstart texutil --purgeall; texexec --pdf --automprun b (4) Open to any suggestion. If (1) doesn't work, but (3) does, you haven't set \runMPgraphicstrue inside \user\cont-sys.tex. done Sorry, no more clues from my side. A full log of (4) would be helpful. here is $> texmfstart texutil --purgeall; texmfstart texexec --pdf --automprun b
This is pdfTeXk, Version 3.141592-1.40.1 (Web2C 7.5.6) (format=cont-en 2007.1.11) 12 JAN 2007 14:55 entering extended mode \write18 enabled. %&-line parsing enabled. (/opt/texlive/2005-test/texmf/web2c/natural.tcx) **b.tex emergencyend (./b.tex
ConTeXt ver: 2007.01.02 13:44 MK II fmt: 2007.1.11 int: english/english
language : language en is active system : cont-new loaded (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex \boislevel=\count210 (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-new.mkii)) system : cont-old loaded (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/opt/texlive/2005-test/texmf-dist/tex/context/base/cont-sys.tex (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-exa.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-syn.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-enc.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-siz.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-map.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-spe.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded language : patterns en->ec:ec->1->2:3 uk->ec:ec->2->2:3 de->texnansi:tex nansi->3->2:3 de->ec:ec->4->2:3 fr->texnansi:texnansi->5->2:3 fr->ec:ec->6->2:3 es->ec:ec->7->2:3 pt->texnansi:texnansi->8->2:3 pt->ec:ec->9->2:3 it->texnansi :texnansi->10->2:3 it->ec:ec->11->2:3 nl->texnansi:texnansi->12->2:3 nl->ec:ec-
13->2:3 cz->il2:il2->14->2:3 cz->ec:ec->15->2:3 sk->il2:il2->16->2:3 sk->ec:ec ->17->2:3 pl->pl0:pl0->18->2:3 pl->ec:ec->19->2:3 pl->qx:qx->20->2:3 loaded specials : tex,postscript,rokicki loaded \openout3 = `b.tui'.
system : b.top loaded (./b.top specials : loading definition file tpd (/opt/texlive/2005-test/texmf-dist/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/opt/texlive/2005-test/texmf-dist/tex/context/base/spec-fdf.tex \everygoto=\toks329 \PDFsymbolbox=\box157 \everyPDFxform=\toks330
(/opt/texlive/2005-test/texmf-dist/tex/context/base/spec-fdf.mkii)) specials : fdf loaded \everyPDFximage=\toks331 \PDFcurrenttransparency=\count211 ) specials : fdf,tpd loaded ) \openout0 = `b-mpgraph.mp'.
\openout0 = `mpgraph.mp'.
systems : system commands are enabled color : mpcmyk color space is supported color : mpspot color space is supported color : system rgb is global activated (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (/opt/texlive/2005-test/texmf-dist/tex/context/base/sort-def.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/sort-lan.tex) (./b.tuo) (./b.tuo) (/opt/texlive/2005-test/texmf-dist/tex/context/base/pdfr-def.tex) systems : begin file b at line 2 \@MPG@@MPG@b-mpgraph=\write7 \openout7 = `b-mpgraph.mp'.
\openout6 = `b-mpgraph.mpb'.
I've compiled your src on my tree and the main difference is at this place: [..] system(mpost -progname=metafun -mem=metafun b-mpgraph)...executed. [MP to PDF] (./b-mpgraph.1 (./b.tuo) [..] The mpost call is completely missing in your example. If I have seen it right, you use pdftex 1.40 with TeXLive2005. Are your binaries (especially texmfstart) uptodate? You can also test the today's version of ConTeXt. HTH, Peter
[MP b-mpgraph.1]
fonts : resetting map file list {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-empty.map} fonts : using map file: texnansi-public-lm {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/texnansi-public-lm. map} fonts : using map file: original-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-base.map} fonts : using map file: ec-public-lm {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/ec-public-lm.map} fonts : using map file: ec-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/ec-base.map} fonts : using map file: lm-ec {/opt/texlive/2005-test/texmf-dist/fonts/map/dvips/lm/lm-ec.map} fonts : using map file: 8r-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/8r-base.map} fonts : using map file: t5-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/t5-base.map} fonts : using map file: original-ams-base {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-ams-base.m ap} fonts : using map file: original-ams-euler {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-ams-euler. map} fonts : using map file: original-public-lm {/opt/texlive/2005-test/texmf-dist/fonts/map/pdftex/context/original-public-lm. map} [1.1] systems : end file b at line 16 [flush and process b-mpgraph.mp afterwards] ) Here is how much of TeX's memory you used: 1192 strings out of 57297 19676 string characters out of 535637 4605078 words of memory out of 5532220 41056 multiletter control sequences out of 10000+50000 75018 words of font info for 37 fonts, out of 1000000 for 2000 192 hyphenation exceptions out of 8191 47i,18n,51p,255b,471s stack positions out of 5000i,500n,6000p,200000b,5000s {/opt/texlive/2005-test/texmf-dist /fonts/enc/dvips/lm/lm-ec.enc} Output written on b.pdf (1 page, 13516 bytes). PDF statistics: 14 PDF objects out of 1000 (max. 8388607) 9 compressed objects within 1 object stream 0 named destinations out of 1000 (max. 131072) 1 words of extra memory for PDF output out of 10000 (max. 10000000)
luigi _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Peter Rolf wrote: [..]
\openout0 = `b-mpgraph.mp'.
\openout0 = `mpgraph.mp'.
systems : system commands are enabled color : mpcmyk color space is supported color : mpspot color space is supported color : system rgb is global activated (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (./b.tuo) (/opt/texlive/2005-test/texmf-dist/tex/context/base/sort-def.tex) (/opt/texlive/2005-test/texmf-dist/tex/context/base/sort-lan.tex) (./b.tuo) (./b.tuo) (/opt/texlive/2005-test/texmf-dist/tex/context/base/pdfr-def.tex) systems : begin file b at line 2 \@MPG@@MPG@b-mpgraph=\write7 \openout7 = `b-mpgraph.mp'.
\openout6 = `b-mpgraph.mpb'.
I've compiled your src on my tree and the main difference is at this place:
[..] system(mpost -progname=metafun -mem=metafun b-mpgraph)...executed.
[MP to PDF] (./b-mpgraph.1 (./b.tuo) [..]
Seems my tree is not representative (too messy). Just tested your src on ConTeXt live (thanx Patrick for making it work again) and the described lines are also not visible. So you should compare the log from ConTeXt live with your own. Peter
The mpost call is completely missing in your example.
If I have seen it right, you use pdftex 1.40 with TeXLive2005. Are your binaries (especially texmfstart) uptodate? You can also test the today's version of ConTeXt.
HTH, Peter
[MP b-mpgraph.1]
fonts : resetting map file list
Thank you very much. I update all to new context distro 2007-01-12, and after a bit of hacking I was able to compile . Some notes 1) files under web2c in distro ; they can be in multiples dirs in working installation 2) files *ori in in base/ ; they should be edit and save as *.tex I also change texexec.rme in texexec.ini 3) I remade fmt and I and check where they was saved ; 3a) texmfstart texexec --make cont-en 3b) texmfstart texexec --make metafun 3c) texmfstart texexec --make mptopdf luigi
participants (2)
-
luigi scarso
-
Peter Rolf