Hello Steffen,

1) The snipped feature uses the tab key for triggering *further* information, right?

right.

(If I remember correctly) I knew a similar feature (was it in AlphaX/Tk?) where the tab helped me to *complete* the command. For example: \cha + tab gave \chapter or when not clear like: \sub + tab gave a range with all commands starting with \sub... to choose.

Enter \sub and press the escape key (several times). Then you can use the tab key for further information.

In textmate triggering the snipped with tab just works when typed the entire \chapter, right?

right.

There is no-one helping me typing when I get lazy?

If you are too lazy to hit the escape key, then yes :)

2) You assigned F9 to texexec and so on.

(btw: I'll probably change that to cmd-R for the sake of compatibility to existing textmate standards)

When, for some rare reason, I need to change the texexec a bit (with additional options or such), where to do so?

find the 'texexec' command in the bundle editor: Bundles -> Bundle-Editor -> Edit Commands. (In the ConTeXt bundle of course.) If you think that your changes are useful for other users, please share them! The internals will change in the future.

3) Probably a similar (stupid) question: You wrote "the variable PDF_VIEWER, the default is 'Preview'. You can try anything that you can use as an argument for 'open'..." Well, where do I find this in order to have a try?

See http://macromates.com/textmate/manual/environment_variables 9.4 (at the very end). Does this information already help you? Patrick -- ConTeXt wiki and more: http://contextgarden.net

Hi Steffen,

Ahh! The escape-key!! On my machine (up to now) this was already assigned to "enter snippet" for Butler (by petermaurer.de).

You can easily change the key to something else in the bundle editor.

...

...

You wrote "the variable PDF_VIEWER, the default is 'Preview'. You can try anything that you can use as an argument for 'open'..." Well, where do I find this in order to have a try?

See http://macromates.com/textmate/manual/environment_variables 9.4 (at the very end). Does this information already help you?

Well, does it mean that I have to define a project-variable (tmproj) for each project in order to overwrite the default? Inside of ConTeXt.tmbundle I couldn't find a *.tmproj file ...

the mentioning of 'tmproj' is a bit confusing, just ignore it. You have to set this variable from within TextMate. tmproj is just the file extension of the project file, there is nothing useful to edit there. When you create a project 'abc', it will get saved on the drive as 'abc.tmproj'. It has nothing to do with the bundles. There are two different places to set this variable: 1) (global) in textmate's preferences/advanced/shell variables and 2) (each project) in a project's preference window. This works only in a project and you have to follow the instructions on the given webpage: "The way to do this is currently a little secret but if you deselect everything in the project drawer, then click the info (circled I) button, a panel will appear where you can set variables." For both ways, just click on the plus sign in the lower left corner of the window and enter for example Variable Value ------------------------- PDF_VIEWER texniscope ------------------------- HTH Patrick -- ConTeXt wiki and more: http://contextgarden.net

Hi Johannes, Johannes Kuester wrote:

Dear all,

I'm trying to typeset a rather simple list or table where each line should keep the overall grid of my page design. For this I tried "tabulate", "table", and "TABLE", but all failed.

One way to reach this, is to set the row height of every single table line to the default interline space of ConTeXt. The table rows now sync with the grid (same height), but behind the table you are again out of sync. You can use \syncronizegrid to fix this. HTH, Peter P.S. Can anyone with grid experience add some stuff to the Wiki? I had to grep "the base" to find a grid syncronizing macro.

What I need is the following: 4 columns, each with a fixed width. One of the columns may contain a paragraph (i.e. more than one line), like:

Axxx yyyy first entry with zzz more text Bxxx yyyy next entry zzz

The line starting with "B" does not keep the grid -- at least in most cases; I couldn't trace down when and why this fails.

(The specific environment is not important (whether tabulate, table, TABLE, or some other solution), as all entries are supplied by a macro which I could adapt easily).

Johannes

\setuplayout[grid=yes] \showgrid \showstruts \starttext \input tufte \setupTABLE[r][each][height=\the\baselineskip] % default linespacing in ConTeXt \setupTABLE[c][1,2,4][width=.2\textwidth] \setupTABLE[c][3][width=.4\textwidth] \setupTABLE[frame=on] \blank \bTABLE \bTR \bTD Axxx \eTD \bTD yyyy \eTD \bTD [row=2] first entry with\\ more text \eTD \bTD zzz \eTD \eTR % \bTR \bTD \eTD \bTD \eTD % \bTD \eTD % [row=2] \bTD \eTD \eTR % \bTR \bTD Bxxx \eTD \bTD yyyy \eTD \bTD next entry \eTD \bTD zzz \eTD \eTR \eTABLE \synchronizegrid \blank \input tufte \stoptext

Dear Luigi, dear Rolf, thank you for your help. Below is a (hopefully) better example of what I try to do and where it fails. The last line in tabulate (starting with "22C6") loses the grid, and I can't see why. Unfortunately the solutions you suggested did not work for me. I do want to avoid to specify cell heights, I just want to arrange paragraph boxes, all (horizontally) top-aligned with each entry in my table. TABLE with \synchronizegrid would do the trick (a non-framed table would have grid-keeping rows). Still it seems to fail in my specific setting (two-column, I could not trace down what the problem really is). And the need to specify the number of rows is a problem in my case, as I would need to add a parameter to my macro etc. Johannes %%%%%%%%%% \setuplayout[grid=yes] \showgrid \showstruts \starttext \input tufte \starttabulate[|p(.1\textwidth)|p(.1\textwidth)|p(.5\textwidth)|p(.2\textwidth)|]% \NC 002B \NC $+$ \NC plus; Addition \NC \NR \NC 00D7 \NC $\times$ \NC kartesisches Produkt (von Mengen);\hfill\break Kreuzprodukt (Vektorprodukt);\hfill\break mal; Produkt (bei Zahlwerten) \NC \NR \NC 2217 \NC $*$ \NC (Stern, Asterisk); Konvolution; Faltung; Produkt \NC \NR \NC 22C6 \NC $\star$ \NC (Stern); Zeichen fuer spezielle Produkte \NC \NR \stoptabulate \blank \input tufte \stoptext %%%%%%%%%% -- Johannes Kuester typoma mailto:jk@typoma.com http://www.typoma.com

Hi Johannes, Johannes Kuester wrote:

Dear Luigi, dear Rolf,

thank you for your help.

Below is a (hopefully) better example of what I try to do and where it fails.

The last line in tabulate (starting with "22C6") loses the grid, and I can't see why.

as I see it, the problem is caused by the table cells, that use more than one row. In the following row the outer struts are shifted down (inner ones are normal, as they sync with the last rows struts), so that the total height of the row is finally greater than \strutheight. In your example are two places, where this occurs: The two inner struts in front of '(Stern, Asterisk);..' are not on the same horizontal line as the outer strut on the right side. Same for the both outer struts (left,right) of the '22C6' line and the inner one in front of '(Stern); Zeichen für...'. But I donno how to fix this. Best, Peter

Unfortunately the solutions you suggested did not work for me. I do want to avoid to specify cell heights, I just want to arrange paragraph boxes, all (horizontally) top-aligned with each entry in my table.

TABLE with \synchronizegrid would do the trick (a non-framed table would have grid-keeping rows). Still it seems to fail in my specific setting (two-column, I could not trace down what the problem really is). And the need to specify the number of rows is a problem in my case, as I would need to add a parameter to my macro etc.

Johannes

%%%%%%%%%%

\setuplayout[grid=yes]

\showgrid \showstruts

\starttext

\input tufte

\starttabulate[|p(.1\textwidth)|p(.1\textwidth)|p(.5\textwidth)|p(.2\textwidth)|]% \NC 002B \NC $+$ \NC plus; Addition \NC \NR \NC 00D7 \NC $\times$ \NC kartesisches Produkt (von Mengen);\hfill\break Kreuzprodukt (Vektorprodukt);\hfill\break mal; Produkt (bei Zahlwerten) \NC \NR \NC 2217 \NC $*$ \NC (Stern, Asterisk); Konvolution; Faltung; Produkt \NC \NR \NC 22C6 \NC $\star$ \NC (Stern); Zeichen fuer spezielle Produkte \NC \NR \stoptabulate

\blank

\input tufte

\stoptext

%%%%%%%%%%

2007/3/28, Johannes Kuester :

It seems linetable would do just what I need (at least I get rid of the strut / unwanted vertical spacing problem, so I do get a grid-keeping table), but:

Is there a way to use linetable in two-column mode? (i.e. the consecutive lines of my table should be set just like normal text would in two-column mode).

Currently linetable just streches over the whole textwidth, as it adds white space between columns.

Johannes

%%%%%%%%%%

In my previous example below, using

\setuplinetable[n=4]

\setuplinetable[c][1] [width=6mm] \setuplinetable[c][2] [width=5mm] \setuplinetable[c][3] [width=51mm] \setuplinetable[c][4] [width=1mm]

and then startlinetable / stoplinetable instead of start/stoptabulate works fine for the vertical spacing problem.

...

...

%%%%%%%%%%

\setuplayout[grid=yes]

\showgrid \showstruts

\starttext

\input tufte

\starttabulate[|p(.1\textwidth)|p(.1\textwidth)|p(.5\textwidth)|p(.2\textwidth)|]%

...

\NC 002B \NC $+$ \NC plus; Addition \NC \NR \NC 00D7 \NC $\times$ \NC kartesisches Produkt (von Mengen);\hfill\break Kreuzprodukt (Vektorprodukt);\hfill\break mal; Produkt (bei Zahlwerten) \NC \NR \NC 2217 \NC $*$ \NC (Stern, Asterisk); Konvolution; Faltung; Produkt \NC \NR \NC 22C6 \NC $\star$ \NC (Stern); Zeichen fuer spezielle Produkte \NC \NR \stoptabulate

\blank

\input tufte

\stoptext

%%%%%%%%%%

-- Johannes Kuester typoma

Hi Johannes, a short example to play for you. The important things are the stretch and the lines key in \setuplinetable. You should also look at the end of core-ltb, it contains a few interresting examples. \setuplinetable[stretch=yes,lines=fit] \starttext \startcolumns \startlinetable \dorecurse{80}{\NC Text \NC Text \NC\NR} \stoplinetable \stopcolumns \stoptext Wolfgang

luigi scarso wrote:

...

One way to reach this, is to set the row height of every single table line to the default interline space of ConTeXt. The table rows now sync with the grid (same height), but behind the table you are again out of sync. You can use \syncronizegrid to fix this.

when spacing is suboptimal boxed stuff (\bTABLE, \starttable, \framed) should be surrounded by

\startlinecorrection \stoplinecorrection (also better in non grid mode) unless it's a float for your own macros, use \snaptogrid\vbox{...}

hmm, some problems (see %Pj ) %%%%% \setuplayout[grid=yes] %P1 %% all docs is in grid mode, %%%%% but the request was only for tables \showgrid \showstruts

\starttext

\input tufte

\setupTABLE[r][each][height=\the\baselineskip] % default linespacing in ConTeXt \setupTABLE[c][1,2,4][width=.2\textwidth] \setupTABLE[c][3][width=.4\textwidth] \setupTABLE[frame=on]

\blank

\bTABLE \bTR \bTD Axxx \eTD \bTD yyyy \eTD \bTD [row=2] first entry with\\ more text \eTD %P2 %%% you must enter row=2manually %%%%% maybe can be calculate by a macro \bTD zzz \eTD \eTR % \bTR \bTD \eTD \bTD \eTD % \bTD \eTD % [row=2] \bTD \eTD \eTR % \bTR \bTD Bxxx \eTD \bTD yyyy \eTD \bTD next entry \eTD \bTD zzz \ruledvbox to 3cm{ jkjfd kjhsdkfjhsd }\eTD %P3 %% ugly cell -- some try-and-errors to find k such as row=k %%%%% is good \eTR \eTABLE

\synchronizegrid \blank

\input tufte

\stoptext %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

One strategy could be consider both the ways showed. Also I found an interestring document at http://www.datapat.de/101.pdf

luigi _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context

-- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

Hey Patrick, Very cool update. One question tho, for the old version, I was able to play around with the typeset command to allow typesetting with XeTeX. In this new version, there's only one line in the typeset command: typeset_contextfile. Where can I tweak this then? Thanks! Helin On 3/30/07, Patrick Gundlach wrote:

Hi,

I've uploaded the version 0.3 of my TextMate bundle. See http://wiki.contextgarden.net/ConTeXt_Bundle_for_TextMate and http://dl.contextgarden.net/support/

Direct download:

http://dl.contextgarden.net/support/context-tmbundle.dmg

Enjoy, Patrick

Changes:

0.3: * scope set to text.tex.context for compatibility with the latex bundle (text.tex.latex) * include metafun language grammar based on a metapost bundle by Charilaos Skiadas * typeset (cmd-r) output window: * link to pdf file added (runs predefined viewer or 'Preview.app') * link to logfile * in case of an error: link to file/line * keybindings * typeset is now on cmd-r (for the sake of compatibility with all other textmate's bundles) * purge is now on ctrl-alt-backsapce (for the sake of.....) * view in pdfviwer is now on ctrl-alt-cmd-o (for the sake of ....) * cmd-i {\it ...} * cmd-b {\bf ...} * dragging images (png, pdf, jpg) to a ConTeXt source creates \externalfigure[<figname>] * sectioning commands: tab trigger 'sec' and 'sub' * wrap selection in \start...\stop (ctrl-shift-w) * Menu update * support for document outline (symbols in TextMate speak)

-- ConTeXt wiki and more: http://contextgarden.net _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context

-- Helin (Colin) Gai Class of 2009, Duke University Box 96332 Durham, NC 27708 Phone: 919-943-6302 helin.gai at gmail.com hg9 at duke.edu

Very cool update. One question tho, for the old version, I was able to play around with the typeset command to allow typesetting with XeTeX. In this new version, there's only one line in the typeset command: typeset_contextfile. Where can I tweak this then?

download and install 0.4. Then set the variable 'CTX_ENGINE' to 'xetex'. See http://archive.contextgarden.net/message/20070327.172247.4dc0b38a.en.html for instructions. If this doesn't help, please write back. Patrick (the only change in 0.4 is the switch for the xetex engine) -- ConTeXt wiki and more: http://contextgarden.net

Hello Helin,

Personally, I feel it's probably more flexible to have two distinct command, one for pdftex, and another for xetex...

You can set this variable on a per project basis. So for project A set it to xetex, for project B set it to pdftex or unset it. This way you don't have to remeber wich project used which engine. Patrick

Amazing. Thanks so much! On 3/30/07, Patrick Gundlach wrote:

Hello again,

...

Thanks for prompt update.

Personally, I feel it's probably more flexible to have two distinct command, one for pdftex, and another for xetex...

Here is one for you. It is just a duplicate of 'typeset' with the following command:

CTX_ENGINE=xetex typeset_contextfile

Same key equivalent, same scope.

Patrick

-- ConTeXt wiki and more: http://contextgarden.net

_______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context

-- Helin (Colin) Gai Class of 2009, Duke University Box 96332 Durham, NC 27708 Phone: 919-943-6302 helin.gai at gmail.com hg9 at duke.edu